[U-Boot] [RFC/PATCH 1/1] sunxi: Populate the default environment for sunxi-based systems

[Karsten Merker]

Predefine a set of standard environment variables (kernel_addr_r,
ramdisk_addr_r, fdt_addr_r and scriptaddr) to sensible values on
sunxi-based systems and provide a default environment that allows
autobooting of existing boot scripts which were written for
pre-mainlining u-boot-sunxi versions.

Signed-off-by: Karsten Merker <merker at debian.org>
---
 include/configs/sunxi-common.h |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 6a3044f..ac8cb8f 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -124,7 +124,17 @@
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"bootm_size=0x10000000\0"
+	"bootm_size=0x10000000\0" \
+	"fdt_addr_r=0x43000000\0" \
+	"scriptaddr=0x44000000\0" \
+	"kernel_addr_r=0x46000000\0" \
+	"ramdisk_addr_r=0x48000000\0" \
+	"device=mmc\0" \
+	"partition=0:1\0" \
+	"bootdelay=3\0" \
+	"bootcmd=if test -n \"${loadbootscr}\"; then run loadbootscr; fi\0" \
+	"bootscr=boot.scr\0" \
+	"loadbootscr=if test -n \"${device}\" && test -n \"${partition}\"; then for p in /boot/ /; do load ${device} ${partition} ${scriptaddr} ${p}${bootscr} && echo \"Running ${p}${bootscr} from ${device} ${partition}\" && source ${scriptaddr}; done; fi\0"
 
 #define CONFIG_SYS_BOOT_GET_CMDLINE
 
-- 
1.7.10.4