[U-Boot] [PATCH V2 10/18] arm: mx6: ddr: configure MMDC for slow_pd

[Igor Grinberg]

On 08/10/14 20:12, Nikita Kiryanov wrote:
> According to MX6 TRM, both MMDC and DRAM should be configured to
> the same powerdown precharge. Currently, mx6_dram_cfg()
> configures MMDC for fast pd (MDPDC[7] = 0), and the DRAM for
> 'slow exit (DLL off)' (MR0[12] = 0).
> 
> Configure MMDC for slow pd.
> 
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Tim Harvey <tharvey at gateworks.com>
> Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
> Changes in V2:
> 	- Updated commit message to explain what bits in what registers
> 	  correspond to what settings.
> 
>  arch/arm/cpu/armv7/mx6/ddr.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
> index 70ce38f..c0fb749 100644
> --- a/arch/arm/cpu/armv7/mx6/ddr.c
> +++ b/arch/arm/cpu/armv7/mx6/ddr.c
> @@ -463,6 +463,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
>  	mmdc0->mdpdc = (tcke & 0x7) << 16 |
>  			5            << 12 |  /* PWDT_1: 256 cycles */
>  			5            <<  8 |  /* PWDT_0: 256 cycles */
> +			1            <<  7 |  /* SLOW_PD */
>  			1            <<  6 |  /* BOTH_CS_PD */
>  			(tcksrx & 0x7) << 3 |
>  			(tcksre & 0x7);
> 

-- 
Regards,
Igor.