[U-Boot] [PATCH] Fman/mEMAC: mEMAC fix for 10G MAC and PHY
shh.xie at gmail.com
shh.xie at gmail.com
Wed Aug 13 12:32:19 CEST 2014
From: Shaohui Xie <Shaohui.Xie at freescale.com>
1. use Payload length check disable when enable MAC;
2. add XGMII support for setting MAC interface mode;
3. only enable auto negotiation for Non-XGMII mode;
4. return 0xffff if clause 22 is used to read 10G phy_id;
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
arch/powerpc/include/asm/fsl_memac.h | 1 +
drivers/net/fm/memac.c | 12 +++++++++---
drivers/net/fm/memac_phy.c | 2 ++
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h
index 4640e33..f84c1a9 100644
--- a/arch/powerpc/include/asm/fsl_memac.h
+++ b/arch/powerpc/include/asm/fsl_memac.h
@@ -159,6 +159,7 @@ struct memac {
#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+#define MEMAC_CMD_CFG_NO_LEN_CHK 0x20000 /* Payload length check disable */
/* HASHTABLE_CTRL - Hashtable control register */
#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 592a67f..ceed261 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -38,7 +38,8 @@ static void memac_enable_mac(struct fsl_enet_mac *mac)
{
struct memac *regs = mac->base;
- setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+ setbits_be32(®s->command_config,
+ MEMAC_CMD_CFG_RXTX_EN | MEMAC_CMD_CFG_NO_LEN_CHK);
}
static void memac_disable_mac(struct fsl_enet_mac *mac)
@@ -94,11 +95,16 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
if_mode &= ~IF_MODE_MASK;
if_mode |= (IF_MODE_GMII);
break;
+ case PHY_INTERFACE_MODE_XGMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= IF_MODE_XGMII;
+ break;
default:
break;
}
- /* Enable automatic speed selection */
- if_mode |= IF_MODE_EN_AUTO;
+ /* Enable automatic speed selection for Non-XGMII */
+ if (type != PHY_INTERFACE_MODE_XGMII)
+ if_mode |= IF_MODE_EN_AUTO;
if (type == PHY_INTERFACE_MODE_RGMII) {
if_mode &= ~IF_MODE_EN_AUTO;
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index de9c0e9..3fa91b3 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -71,6 +71,8 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
u32 c45 = 1;
if (dev_addr == MDIO_DEVAD_NONE) {
+ if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
+ return 0xffff;
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
--
1.8.0
More information about the U-Boot
mailing list