[U-Boot] [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash

[yangbo.lu at freescale.com]

Any comment?
Thanks a lot.


Best regards,
Yangbo Lu

-----Original Message-----
From: Yangbo Lu [mailto:yangbo.lu at freescale.com] 
Sent: Tuesday, July 29, 2014 3:22 PM
To: u-boot at lists.denx.de
Cc: Lu Yangbo-B47093; Xie Xiaobo-R63061; Wood Scott-B07421
Subject: [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash

Enable these boards mtdparts for nor flash:
p1020rdb-pd, p1021rdb-pc, p1022ds, p1025twr, and p2020rdb-pc.

Signed-off-by: Xie Xiaobo <X.Xie at freescale.com>
Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com>
Cc: Scott Wood <scottwood at freescale.com>
---
Changes for v2:
	- changed commit message
	- fixed max line length problem in code
---
 include/configs/P1022DS.h      | 12 ++++++++++++
 include/configs/p1_p2_rdb_pc.h | 31 +++++++++++++++++++++++++++++++
 include/configs/p1_twr.h       | 12 ++++++++++++
 3 files changed, 55 insertions(+)

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 139d4fe..4480270 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -620,6 +620,18 @@
 #endif
 
 /*
+ * Dynamic MTD Partition support with mtdparts  */ #define 
+CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define 
+CONFIG_CMD_MTDPARTS #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT 
+"nor0=e8000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
+			"14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
+			"512k(dtb),768k(u-boot)"
+
+/*
  * Environment
  */
 #ifdef CONFIG_SPIFLASH
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 07b6179..1ed8838 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -77,6 +77,16 @@
 #define __SW_BOOT_NAND		0x44
 #define __SW_BOOT_PCIE		0x74
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts  */ #define 
+CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define 
+CONFIG_CMD_MTDPARTS #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT 
+"nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
+			"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -95,6 +105,17 @@
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts  */ #define 
+CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define 
+CONFIG_CMD_MTDPARTS #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT 
+"nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+			"256k(dtb),4608k(kernel),9728k(fs)," \
+			"256k(qe-ucode-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -142,6 +163,16 @@
 #define __SW_BOOT_NAND		0xe8
 #define __SW_BOOT_PCIE		0xa8
 #define CONFIG_SYS_L2_SIZE	(512 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts  */ #define 
+CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define 
+CONFIG_CMD_MTDPARTS #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT 
+"nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 #endif
 
 #ifdef CONFIG_SDCARD
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index c296a07..d3093f5 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -389,6 +389,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);  #endif /* CONFIG_TWR-P1025 */
 
 /*
+ * Dynamic MTD Partition support with mtdparts  */ #define 
+CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define 
+CONFIG_CMD_MTDPARTS #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT 
+"nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:256k(vsc7385-firmware)," \
+			"256k(dtb),5632k(kernel),57856k(fs)," \
+			"256k(qe-ucode-firmware),1280k(u-boot)"
+
+/*
  * Environment
  */
 #ifdef CONFIG_SYS_RAMBOOT
--
1.8.5