[U-Boot] [PATCH 13/23] ARM: tegra: Add XUSB pad controller on Tegra124

Thierry Reding thierry.reding at gmail.com
Mon Aug 18 09:16:26 CEST 2014


From: Thierry Reding <treding at nvidia.com>

The XUSB pad controller is used for pinmuxing of the XUSB, PCIe and SATA
lanes.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm/dts/tegra124.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
index 4561c5f83943..d48f1a34ec3c 100644
--- a/arch/arm/dts/tegra124.dtsi
+++ b/arch/arm/dts/tegra124.dtsi
@@ -1,5 +1,6 @@
 #include <dt-bindings/gpio/tegra-gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 
 #include "skeleton.dtsi"
 
@@ -192,6 +193,15 @@
 		clocks = <&tegra_car 105>;
 	};
 
+	padctl: padctl at 7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x7009f000 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+	};
+
 	sdhci at 700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x700b0000 0x200>;
-- 
2.0.4



More information about the U-Boot mailing list