[U-Boot] [PATCH 19/23] ARM: tegra: Enable PCIe on Beaver
Thierry Reding
thierry.reding at gmail.com
Mon Aug 18 09:16:32 CEST 2014
From: Thierry Reding <treding at nvidia.com>
The Beaver has an ethernet NIC connected to the PCIe bus. Enable the
PCIe controller and the network device driver so that the device can
boot over the network.
In addition the board has a mini-PCIe expansion slot.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
arch/arm/dts/tegra30-beaver.dts | 166 ++++++++++++++++++++++++++++++++++++++++
board/nvidia/cardhu/cardhu.c | 56 ++++++++++++++
include/configs/beaver.h | 10 +++
3 files changed, 232 insertions(+)
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
index 85e62e9db32e..e113801fdfb4 100644
--- a/arch/arm/dts/tegra30-beaver.dts
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -23,6 +23,27 @@
reg = <0x80000000 0x7ff00000>;
};
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&sys_3v3_pexs_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
+
+ pci at 1,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 2,0 {
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 3,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+ };
+
i2c at 7000c000 {
status = "okay";
clock-frequency = <100000>;
@@ -46,6 +67,110 @@
i2c at 7000d000 {
status = "okay";
clock-frequency = <100000>;
+
+ pmic: tps65911 at 2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_5v_in_reg>;
+ vcc2-supply = <&vdd_5v_in_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v_in_reg>;
+ vcc5-supply = <&vdd_5v_in_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_5v_in_reg>;
+ vccio-supply = <&vdd_5v_in_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
};
spi at 7000da00 {
@@ -81,4 +206,45 @@
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v_in_reg: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v_in";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ sys_3v3_reg: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "sys_3v3,vdd_3v3_alw";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ sys_3v3_pexs_reg: regulator at 7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "sys_3v3_pexs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+ };
};
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index cc0e5e130fda..5738dd1f5195 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -8,8 +8,11 @@
#include <common.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include "pinmux-config-cardhu.h"
#include <i2c.h>
+#include <netdev.h>
#define PMU_I2C_ADDRESS 0x2D
#define MAX_I2C_RETRY 3
@@ -76,3 +79,56 @@ void pin_mux_mmc(void)
board_sdmmc_voltage_init();
}
#endif /* MMC */
+
+#ifdef CONFIG_PCI_TEGRA
+int tegra_pcie_board_init(void)
+{
+ unsigned int old_bus;
+ u8 addr, data[1];
+ int err;
+
+ old_bus = i2c_get_bus_num();
+
+ err = i2c_set_bus_num(0);
+ if (err) {
+ debug("failed to set I2C bus\n");
+ return err;
+ }
+
+ /* TPS659110: LDO1_REG = 1.05V, ACTIVE */
+ data[0] = 0x15;
+ addr = 0x30;
+
+ err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ if (err) {
+ debug("failed to set VDD supply\n");
+ return err;
+ }
+
+ /* GPIO: PEX = 3.3V */
+ err = gpio_request(GPIO_PL7, "PEX");
+ if (err < 0)
+ return err;
+
+ gpio_direction_output(GPIO_PL7, 1);
+
+ /* TPS659110: LDO2_REG = 1.05V, ACTIVE */
+ data[0] = 0x15;
+ addr = 0x31;
+
+ err = i2c_read(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ if (err) {
+ debug("failed to set AVDD supply\n");
+ return err;
+ }
+
+ i2c_set_bus_num(old_bus);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+#endif /* PCI */
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index ae831127985f..bc96f6438d3c 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -84,6 +84,16 @@
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_RTL8169
+
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
--
2.0.4
More information about the U-Boot
mailing list