[U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code

Kishon Vijay Abraham I kishon at ti.com
Mon Aug 18 16:28:32 CEST 2014


Implemented board_usb_init(), board_usb_cleanup() and
board_usb_gadget_handle_interrupts() in dra7xx board file that
can be invoked by various gadget drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 arch/arm/include/asm/arch-omap5/omap.h |  12 ++++
 board/ti/dra7xx/evm.c                  | 106 +++++++++++++++++++++++++++++++++
 2 files changed, 118 insertions(+)

diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index b9600cf..a2348a2 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -33,6 +33,18 @@
 #define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
 #endif
 
+#ifdef CONFIG_DRA7XX
+#define DRA7_USB_OTG_SS1_BASE		0x48890000
+#define DRA7_USB_OTG_SS1_GLUE_BASE	0x48880000
+#define DRA7_USB3_PHY1_PLL_CTRL		0x4A084C00
+#define DRA7_USB3_PHY1_POWER		0x4A002370
+#define DRA7_USB2_PHY1_POWER		0x4A002300
+
+#define DRA7_USB_OTG_SS2_BASE		0x488D0000
+#define DRA7_USB_OTG_SS2_GLUE_BASE	0x488C0000
+#define DRA7_USB2_PHY2_POWER		0x4A002E74
+#endif
+
 /* To be verified */
 #define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
 #define OMAP5430_CONTROL_ID_CODE_ES2_0          0x1B94202F
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 073d151..0d1b93f 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -13,10 +13,14 @@
 #include <common.h>
 #include <palmas.h>
 #include <sata.h>
+#include <usb.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sata.h>
 #include <environment.h>
+#include <dwc3-uboot.h>
+#include <dwc3-omap-uboot.h>
+#include <ti-usb-phy-uboot.h>
 
 #include "mux_data.h"
 
@@ -125,6 +129,108 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+static struct dwc3_device usb_otg_ss1 = {
+	.maximum_speed = USB_SPEED_SUPER,
+	.base = DRA7_USB_OTG_SS1_BASE,
+	.needs_fifo_resize = true,
+};
+
+static struct dwc3_omap_device usb_otg_ss1_glue = {
+	.base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
+	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+	.vbus_id_status = OMAP_DWC3_VBUS_VALID,
+};
+
+static struct ti_usb_phy_device usb_phy1_device = {
+	.pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
+	.usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
+	.usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
+};
+
+static struct dwc3_device usb_otg_ss2 = {
+	.maximum_speed = USB_SPEED_SUPER,
+	.base = DRA7_USB_OTG_SS2_BASE,
+	.needs_fifo_resize = true,
+};
+
+static struct dwc3_omap_device usb_otg_ss2_glue = {
+	.base = (void *) DRA7_USB_OTG_SS2_GLUE_BASE,
+	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+	.vbus_id_status = OMAP_DWC3_VBUS_VALID,
+};
+
+static struct ti_usb_phy_device usb_phy2_device = {
+	.usb2_phy_power = (void *) DRA7_USB2_PHY2_POWER,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	switch (index) {
+	case 0:
+		if (init == USB_INIT_DEVICE) {
+			usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
+			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+		} else {
+			usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
+			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+		}
+
+		ti_usb_phy_uboot_init(&usb_phy1_device);
+		dwc3_omap_uboot_init(&usb_otg_ss1_glue);
+		dwc3_uboot_init(&usb_otg_ss1);
+		break;
+	case 1:
+		if (init == USB_INIT_DEVICE) {
+			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
+			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+		} else {
+			usb_otg_ss2.dr_mode = USB_DR_MODE_HOST;
+			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+		}
+
+		ti_usb_phy_uboot_init(&usb_phy2_device);
+		dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+		dwc3_uboot_init(&usb_otg_ss2);
+		break;
+	default:
+		printf("Invalid Controller Index\n");
+	}
+
+	return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	switch (index) {
+	case 0:
+	case 1:
+		ti_usb_phy_uboot_exit(index);
+		dwc3_uboot_exit(index);
+		dwc3_omap_uboot_exit(index);
+		break;
+	default:
+		printf("Invalid Controller Index\n");
+	}
+	return 0;
+}
+
+int board_usb_gadget_handle_interrupts(int index)
+{
+	u32 status;
+	switch (index) {
+	case 0:
+	case 1:
+		status = dwc3_omap_uboot_interrupt_status(index);
+		if (status)
+			dwc3_uboot_handle_interrupt(index);
+		break;
+	default:
+		printf("Invalid Controller Index\n");
+	}
+
+	return 0;
+}
+
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
 int spl_start_uboot(void)
 {
-- 
1.9.1



More information about the U-Boot mailing list