[U-Boot] [PATCH 04/11] imx: ventana: add appropriate delay following GSC i2c write

[Stefano Babic]

On 08/08/2014 07:35, Tim Harvey wrote:
> The Gateworks System Controller EEPROM config is flash based. Add a delay
> following writes to avoid errors on back-to-back writes.
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  board/gateworks/gw_ventana/gsc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c
> index 37966ab..1cf38d4 100644
> --- a/board/gateworks/gw_ventana/gsc.c
> +++ b/board/gateworks/gw_ventana/gsc.c
> @@ -57,7 +57,7 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
>  			break;
>  		mdelay(10);
>  	}
> -	mdelay(1);
> +	mdelay(100);
>  	return ret;
>  }
>  
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================