[U-Boot] [PATCH 2/2] mx6sxsabresd: Add Ethernet support

[Stefano Babic]

Hi Fabio,

On 15/08/2014 05:24, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> mx6sxsabresd board has 2 FEC ports, each one connected to a AR8031.
> 
> Add support for one FEC port initially.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> FEC is not functional after this series.
> 
> There is still another patch for FEC that I will submit later that makes
> FEC functional on mx6solox, but it is orthogonal to this series.
> 

This is ok for me. Please feel free to send the additional patch fixing
FEC behavior.

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================