[U-Boot] [PATCH v2 2/2] powerpc/t1042RDB: Add Video - HDMI support

[York Sun]

On 03/18/2014 07:47 PM, Dongsheng Wang wrote:
> From: Jason Jin <Jason.Jin at freescale.com>
> 
> T1042 has internal display interface unit (DIU) for driving video.
> T1042RDB supports video mode via
> -LCD using TI enconder
> -HDMI type interface via HDMI encoder
> 
> Chrontel, CH7301C encoder which is I2C programmable is used
> as HDMI connector on T1042RDB.
> This patch add support to
> -enable Video interface for T1042RDB
> -route qixis multiplexing to enable DIU-HDMI interface on board
> -program DIU pixel clock gerenartor for T1042
> -program HDMI encoder via I2C on board
> 
> This patch refer to the upstream diu patch
> (337b0c52b3296f371d04aef71a833e09110e0e6b) for T1040qds.
> 
> Signed-off-by: Jason Jin <Jason.Jin at freescale.com>
> Signed-off-by: Wang Dongsheng <dongsheng.wang at freescale.com>
> ---
> V2:
> - Restore CONFIG_SYS_CONSOLE_IS_IN_ENV macors.
> - Restore CONFIG_SYS_MALLOC_LEN macors, this macors not effect FB.
> - Add a blank line between declarations and code.

Applied to u-boot-mpc85xx master branch, awaiting for upstream.

York