[U-Boot] [PATCH 0/2] imx: ventana: Add pci fixup for PLX switch

[Tim Harvey]

On Thu, Aug 7, 2014 at 10:49 PM, Tim Harvey <tharvey at gateworks.com> wrote:
> Many of the Gateworks Ventana boards have a PLX PCIe switch where GPIO
> on the switch is used as the PERST# of the downstream ports. In the Linux
> kernel there is a PCI fixup that asserts these properly when the upstream
> port is enumerated.
>
> The first patch in this serial adds a board_pci_fixup_dev function define
> to allow hooking similarly to the kernel pci fixup functionality.
>
> The second patch uses the board_pci_fixup_dev function to perform the
> GPIO configuration on the switch for the downstream ports.
>
> Tim Harvey (2):
>   pci: add support for board_pci_fixup_dev function
>   imx: ventana: add pci fixup for PLX PEX860x switch GPIO
>
>  board/gateworks/gw_ventana/gw_ventana.c | 30 ++++++++++++++++++++++++++++++
>  drivers/pci/pci.c                       |  4 ++++
>  include/configs/gw_ventana.h            |  1 +
>  include/pci.h                           |  7 +++++++
>  4 files changed, 42 insertions(+)
>
> --
> 1.8.3.2
>

Any comments on these? I'm wondering if there is someone else I should
be including with regards to reviewing pci changes.

Regards,

Tim