[U-Boot] [PATCH] nios2: remove obsolete PCI5441 and PK1C20 boards
Thomas Chou
thomas at wytron.com.tw
Fri Aug 22 05:16:51 CEST 2014
Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
arch/nios2/Kconfig | 8 --
board/psyent/common/AMDLV065D.c | 170 ----------------------------
board/psyent/pci5441/Kconfig | 15 ---
board/psyent/pci5441/MAINTAINERS | 6 -
board/psyent/pci5441/Makefile | 8 --
board/psyent/pci5441/config.mk | 14 ---
board/psyent/pci5441/pci5441.c | 24 ----
board/psyent/pk1c20/Kconfig | 15 ---
board/psyent/pk1c20/MAINTAINERS | 6 -
board/psyent/pk1c20/Makefile | 8 --
board/psyent/pk1c20/config.mk | 14 ---
board/psyent/pk1c20/led.c | 46 --------
board/psyent/pk1c20/pk1c20.c | 36 ------
configs/PCI5441_defconfig | 2 -
configs/PK1C20_defconfig | 2 -
include/configs/PCI5441.h | 150 -------------------------
include/configs/PK1C20.h | 225 --------------------------------------
17 files changed, 0 insertions(+), 749 deletions(-)
delete mode 100644 board/psyent/common/AMDLV065D.c
delete mode 100644 board/psyent/pci5441/Kconfig
delete mode 100644 board/psyent/pci5441/MAINTAINERS
delete mode 100644 board/psyent/pci5441/Makefile
delete mode 100644 board/psyent/pci5441/config.mk
delete mode 100644 board/psyent/pci5441/pci5441.c
delete mode 100644 board/psyent/pk1c20/Kconfig
delete mode 100644 board/psyent/pk1c20/MAINTAINERS
delete mode 100644 board/psyent/pk1c20/Makefile
delete mode 100644 board/psyent/pk1c20/config.mk
delete mode 100644 board/psyent/pk1c20/led.c
delete mode 100644 board/psyent/pk1c20/pk1c20.c
delete mode 100644 configs/PCI5441_defconfig
delete mode 100644 configs/PK1C20_defconfig
delete mode 100644 include/configs/PCI5441.h
delete mode 100644 include/configs/PK1C20.h
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index b703646..0cba45b 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -11,16 +11,8 @@ choice
config TARGET_NIOS2_GENERIC
bool "Support nios2-generic"
-config TARGET_PCI5441
- bool "Support PCI5441"
-
-config TARGET_PK1C20
- bool "Support PK1C20"
-
endchoice
source "board/altera/nios2-generic/Kconfig"
-source "board/psyent/pci5441/Kconfig"
-source "board/psyent/pk1c20/Kconfig"
endmenu
diff --git a/board/psyent/common/AMDLV065D.c b/board/psyent/common/AMDLV065D.c
deleted file mode 100644
index 64cb970..0000000
--- a/board/psyent/common/AMDLV065D.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <common.h>
-#include <asm/io.h>
-
-#define SECTSZ (64 * 1024)
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*----------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
- int i;
- unsigned long addr;
- flash_info_t *fli = &flash_info[0];
-
- fli->size = CONFIG_SYS_FLASH_SIZE;
- fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
- addr = CONFIG_SYS_FLASH_BASE;
- for (i = 0; i < fli->sector_count; ++i) {
- fli->start[i] = addr;
- addr += SECTSZ;
- fli->protect[i] = 1;
- }
-
- return (CONFIG_SYS_FLASH_SIZE);
-}
-/*--------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
- int i, k;
- int erased;
- unsigned long *addr;
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
-
- /* Check if whole sector is erased */
- erased = 1;
- addr = (unsigned long *) info->start[i];
- for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) {
- if ( readl(addr++) != (unsigned long)-1) {
- erased = 0;
- break;
- }
- }
-
- /* Print the info */
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " ");
- }
- printf ("\n");
-}
-
-/*-------------------------------------------------------------------*/
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- unsigned char *addr = (unsigned char *) info->start[0];
- unsigned char *addr2;
- int prot, sect;
- ulong start;
-
- /* Some sanity checking */
- if ((s_first < 0) || (s_first > s_last)) {
- printf ("- no sectors to erase\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* It's ok to erase multiple sectors provided we don't delay more
- * than 50 usec between cmds ... at which point the erase time-out
- * occurs. So don't go and put printf() calls in the loop ... it
- * won't be very helpful ;-)
- */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (unsigned char *) info->start[sect];
- writeb (0xaa, addr);
- writeb (0x55, addr);
- writeb (0x80, addr);
- writeb (0xaa, addr);
- writeb (0x55, addr);
- writeb (0x30, addr2);
- /* Now just wait for 0xff & provide some user
- * feedback while we wait.
- */
- start = get_timer (0);
- while ( readb (addr2) != 0xff) {
- udelay (1000 * 1000);
- putc ('.');
- if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("timeout\n");
- return 1;
- }
- }
- }
- }
- printf ("\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-
- vu_char *cmd = (vu_char *) info->start[0];
- vu_char *dst = (vu_char *) addr;
- unsigned char b;
- ulong start;
-
- while (cnt) {
- /* Check for sufficient erase */
- b = *src;
- if ((readb (dst) & b) != b) {
- printf ("%02x : %02x\n", readb (dst), b);
- return (2);
- }
-
- writeb (0xaa, cmd);
- writeb (0x55, cmd);
- writeb (0xa0, cmd);
- writeb (dst, b);
-
- /* Verify write */
- start = get_timer (0);
- while (readb (dst) != b) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return 1;
- }
- }
- dst++;
- src++;
- cnt--;
- }
-
- return (0);
-}
diff --git a/board/psyent/pci5441/Kconfig b/board/psyent/pci5441/Kconfig
deleted file mode 100644
index d722f31..0000000
--- a/board/psyent/pci5441/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_PCI5441
-
-config SYS_BOARD
- string
- default "pci5441"
-
-config SYS_VENDOR
- string
- default "psyent"
-
-config SYS_CONFIG_NAME
- string
- default "PCI5441"
-
-endif
diff --git a/board/psyent/pci5441/MAINTAINERS b/board/psyent/pci5441/MAINTAINERS
deleted file mode 100644
index f1f10e9..0000000
--- a/board/psyent/pci5441/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PCI5441 BOARD
-M: Scott McNutt <smcnutt at psyent.com>
-S: Maintained
-F: board/psyent/pci5441/
-F: include/configs/PCI5441.h
-F: configs/PCI5441_defconfig
diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile
deleted file mode 100644
index 364f163..0000000
--- a/board/psyent/pci5441/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := pci5441.o ../common/AMDLV065D.o
diff --git a/board/psyent/pci5441/config.mk b/board/psyent/pci5441/config.mk
deleted file mode 100644
index 776fa8a..0000000
--- a/board/psyent/pci5441/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt at psyent.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0x018e0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/psyent/pci5441/pci5441.c b/board/psyent/pci5441/pci5441.c
deleted file mode 100644
index 6d619e5..0000000
--- a/board/psyent/pci5441/pci5441.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("BOARD : Psyent PCI-5441\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
diff --git a/board/psyent/pk1c20/Kconfig b/board/psyent/pk1c20/Kconfig
deleted file mode 100644
index 75f6cd1..0000000
--- a/board/psyent/pk1c20/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_PK1C20
-
-config SYS_BOARD
- string
- default "pk1c20"
-
-config SYS_VENDOR
- string
- default "psyent"
-
-config SYS_CONFIG_NAME
- string
- default "PK1C20"
-
-endif
diff --git a/board/psyent/pk1c20/MAINTAINERS b/board/psyent/pk1c20/MAINTAINERS
deleted file mode 100644
index 32b901a..0000000
--- a/board/psyent/pk1c20/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PK1C20 BOARD
-M: Scott McNutt <smcnutt at psyent.com>
-S: Maintained
-F: board/psyent/pk1c20/
-F: include/configs/PK1C20.h
-F: configs/PK1C20_defconfig
diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile
deleted file mode 100644
index 5450f93..0000000
--- a/board/psyent/pk1c20/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := pk1c20.o led.o ../common/AMDLV065D.o
diff --git a/board/psyent/pk1c20/config.mk b/board/psyent/pk1c20/config.mk
deleted file mode 100644
index 83cfadc..0000000
--- a/board/psyent/pk1c20/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt at psyent.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/psyent/pk1c20/led.c b/board/psyent/pk1c20/led.c
deleted file mode 100644
index 580d590..0000000
--- a/board/psyent/pk1c20/led.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <nios2-io.h>
-#include <status_led.h>
-
-/* The LED port is configured as output only, so we
- * must track the state manually.
- */
-static led_id_t val = 0;
-
-void __led_init (led_id_t mask, int state)
-{
- nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
- if (state == STATUS_LED_ON)
- val &= ~mask;
- else
- val |= mask;
- writel (val, &pio->data);
-}
-
-void __led_set (led_id_t mask, int state)
-{
- nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
- if (state == STATUS_LED_ON)
- val &= ~mask;
- else
- val |= mask;
- writel (val, &pio->data);
-}
-
-void __led_toggle (led_id_t mask)
-{
- nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
- val ^= mask;
- writel (val, &pio->data);
-}
diff --git a/board/psyent/pk1c20/pk1c20.c b/board/psyent/pk1c20/pk1c20.c
deleted file mode 100644
index 0b4c9f8..0000000
--- a/board/psyent/pk1c20/pk1c20.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("BOARD : Psyent PK-1C20\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/configs/PCI5441_defconfig b/configs/PCI5441_defconfig
deleted file mode 100644
index a4bfdb4..0000000
--- a/configs/PCI5441_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_NIOS2=y
-CONFIG_TARGET_PCI5441=y
diff --git a/configs/PK1C20_defconfig b/configs/PK1C20_defconfig
deleted file mode 100644
index bb2513a..0000000
--- a/configs/PK1C20_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_NIOS2=y
-CONFIG_TARGET_PK1C20=y
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
deleted file mode 100644
index 7ae25d7..0000000
--- a/include/configs/PCI5441.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*------------------------------------------------------------------------
- * BOARD/CPU
- *----------------------------------------------------------------------*/
-#define CONFIG_PCI5441 1 /* PCI-5441 board */
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
-
-#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x00920828 /* System id address */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * CACHE -- the following will support II/s and II/f. The II/s does not
- * have dcache, so the cache instructions will behave as NOPs.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
-#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
-#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
-#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
-
-/*------------------------------------------------------------------------
- * MEMORY BASE ADDRESSES
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
-#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128k */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#define CONFIG_ALTERA_UART 1 /* Use altera uart */
-#if defined(CONFIG_ALTERA_JTAG_UART)
-#define CONFIG_SYS_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
-#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x009208a0 /* UART base addr */
-#endif
-
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
-
-/*------------------------------------------------------------------------
- * DEBUG
- *----------------------------------------------------------------------*/
-#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
-
-/*------------------------------------------------------------------------
- * TIMEBASE --
- *
- * The high res timer defaults to 1 msec. Since it includes the period
- * registers, the interrupt frequency can be reduced using TMRCNT.
- * If the default period is acceptable, TMRCNT can be left undefined.
- * TMRMS represents the desired mecs per tick (msecs per interrupt).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LOW_RES_TIMER
-#define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVES
-
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* Provide extended help*/
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
deleted file mode 100644
index e7d0864..0000000
--- a/include/configs/PK1C20.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*------------------------------------------------------------------------
- * BOARD/CPU
- *----------------------------------------------------------------------*/
-#define CONFIG_PK1C20 1 /* PK1C20 board */
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
-
-#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * CACHE -- the following will support II/s and II/f. The II/s does not
- * have dcache, so the cache instructions will behave as NOPs.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
-#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
-#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
-#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
-
-/*------------------------------------------------------------------------
- * MEMORY BASE ADDRESSES
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
-#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
-#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
-#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#define CONFIG_ALTERA_UART 1 /* Use altera uart */
-#if defined(CONFIG_ALTERA_JTAG_UART)
-#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
-#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
-#endif
-
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
-
-/*------------------------------------------------------------------------
- * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
- * epcs device access is enabled. The base address is the epcs
- * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
- * The register base is currently at offset 0x600 from the memory base.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NIOS_EPCSBASE 0x02100200 /* EPCS register base */
-
-/*------------------------------------------------------------------------
- * DEBUG
- *----------------------------------------------------------------------*/
-#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
-
-/*------------------------------------------------------------------------
- * TIMEBASE --
- *
- * The high res timer defaults to 1 msec. Since it includes the period
- * registers, the interrupt frequency can be reduced using TMRCNT.
- * If the default period is acceptable, TMRCNT can be left undefined.
- * TMRMS represents the desired mecs per tick (msecs per interrupt).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LOW_RES_TIMER
-#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period */
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-
-/*------------------------------------------------------------------------
- * STATUS LED -- Provides a simple blinking led. For Nios2 each board
- * must implement its own led routines -- leds are, after all,
- * board-specific, no?
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
-#define CONFIG_STATUS_LED /* Enable status driver */
-#define CONFIG_BOARD_SPECIFIC_LED
-
-#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
-#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
-
-/*------------------------------------------------------------------------
- * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
- * and really doesn't need any additional clutter. So I choose the lazy
- * way out to avoid changes there -- define the base address to ensure
- * cache bypass so there's no need to monkey with inx/outx macros.
- *----------------------------------------------------------------------*/
-#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
-#define CONFIG_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVES
-
-
-/*------------------------------------------------------------------------
- * COMPACT FLASH
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_IDE)
-#define CONFIG_IDE_PREINIT /* Implement id_preinit */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0x00900800 /* ATA base addr */
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */
-#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */
-#define CONFIG_DOS_PARTITION
-
-/* Board-specific cf regs */
-#define CONFIG_SYS_CF_PRESENT 0x00900880 /* CF Present PIO base */
-#define CONFIG_SYS_CF_POWER 0x00900890 /* CF Power FET PIO base*/
-#define CONFIG_SYS_CF_ATASEL 0x009008a0 /* CF ATASEL PIO base */
-
-#endif
-
-/*------------------------------------------------------------------------
- * JFFS2
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS_CUSTOM_PART /* board defined part */
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* Provide extended help*/
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
-
-#define CONFIG_SYS_HUSH_PARSER
-
-#endif /* __CONFIG_H */
--
1.7.1
More information about the U-Boot
mailing list