[U-Boot] [PATCH] mvebu_mmc: Driver addition

[Mario Schuknecht]

In function mvebu_mmc_write notice command timeout. It is possible that a
command is done, but a timeout occurred.

Enable timeout in set bus function.

Set window registers. Without that I could not use the driver on a Kirkwood
88F6282 SoC.

Set high capacity and 52MHz driver feature.

Signed-off-by: Mario Schuknecht <mario.schuknecht at dresearch-fe.de>
---
 drivers/mmc/mvebu_mmc.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/mvebu_mmc.c b/drivers/mmc/mvebu_mmc.c
index 9759198..53754aa 100644
--- a/drivers/mmc/mvebu_mmc.c
+++ b/drivers/mmc/mvebu_mmc.c
@@ -17,8 +17,12 @@
 #include <asm/arch/kirkwood.h>
 #include <mvebu_mmc.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define DRIVER_NAME "MVEBU_MMC"
 
+#define MVEBU_TARGET_DRAM 0
+
 static void mvebu_mmc_write(u32 offs, u32 val)
 {
 	writel(val, CONFIG_SYS_MMC_BASE + (offs));
@@ -164,6 +168,9 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 			return TIMEOUT;
 		}
 	}
+	if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) &
+		(SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT))
+		return TIMEOUT;
 
 	/* Handling response */
 	if (cmd->resp_type & MMC_RSP_136) {
@@ -271,6 +278,7 @@ static void mvebu_mmc_set_bus(unsigned int bus)
 
 	/* default to maximum timeout */
 	ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX);
+	ctrl_reg |= SDIO_HOST_CTRL_TMOUT_EN;
 
 	ctrl_reg |= SDIO_HOST_CTRL_PUSH_PULL_EN;
 
@@ -296,6 +304,53 @@ static void mvebu_mmc_set_ios(struct mmc *mmc)
 	mvebu_mmc_set_clk(mmc->clock);
 }
 
+/*
+ * Set window register.
+ */
+static void mvebu_window_setup(void)
+{
+	int i;
+
+        for (i = 0; i < 4; i++) {
+		mvebu_mmc_write(WINDOW_CTRL(i), 0);
+		mvebu_mmc_write(WINDOW_BASE(i), 0);
+        }
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		u32 size, base, attrib;
+
+		/* Enable DRAM bank */
+		switch (i) {
+		case 0:
+			attrib = KWCPU_ATTR_DRAM_CS0;
+			break;
+		case 1:
+			attrib = KWCPU_ATTR_DRAM_CS1;
+			break;
+		case 2:
+			attrib = KWCPU_ATTR_DRAM_CS2;
+			break;
+		case 3:
+			attrib = KWCPU_ATTR_DRAM_CS3;
+			break;
+		default:
+			/* invalide bank, disable access */
+			attrib = 0;
+			break;
+		}
+
+		size = gd->bd->bi_dram[i].size;
+		base = gd->bd->bi_dram[i].start;
+		if ((size) && (attrib))
+			mvebu_mmc_write(WINDOW_CTRL(i),
+				MVCPU_WIN_CTRL_DATA(size, MVEBU_TARGET_DRAM,
+					attrib, MVCPU_WIN_ENABLE));
+		else
+			mvebu_mmc_write(WINDOW_CTRL(i), MVCPU_WIN_DISABLE);
+
+		mvebu_mmc_write(WINDOW_BASE(i), base);
+	}
+}
+
 static int mvebu_mmc_initialize(struct mmc *mmc)
 {
 	debug("%s: mvebu_mmc_initialize", DRIVER_NAME);
@@ -322,6 +377,8 @@ static int mvebu_mmc_initialize(struct mmc *mmc)
 	mvebu_mmc_write(SDIO_NOR_INTR_EN, 0);
 	mvebu_mmc_write(SDIO_ERR_INTR_EN, 0);
 
+	mvebu_window_setup();
+
 	/* SW reset */
 	mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW);
 
@@ -342,7 +399,7 @@ static struct mmc_config mvebu_mmc_cfg = {
 	.f_min		= MVEBU_MMC_BASE_FAST_CLOCK / MVEBU_MMC_BASE_DIV_MAX,
 	.f_max		= MVEBU_MMC_CLOCKRATE_MAX,
 	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.host_caps	= MMC_MODE_4BIT | MMC_MODE_HS,
+	.host_caps	= MMC_MODE_4BIT | MMC_MODE_HS | MMC_MODE_HC | MMC_MODE_HS_52MHz,
 	.part_type	= PART_TYPE_DOS,
 	.b_max		= CONFIG_SYS_MMC_MAX_BLK_COUNT,
 };
-- 
1.8.4.5