[U-Boot] [U-Boot, U-boot, v3, 2/3] common: cmd_nand: add nand ecclayout command

[Ivan Khoronzhuk]

On 08/25/2014 10:14 PM, Tom Rini wrote:
> On Tue, Jun 24, 2014 at 04:49:05PM +0300, Khoronzhuk, Ivan wrote:
>
>> From: WingMan Kwok <w-kwok2 at ti.com>
>>
>> This commit adds a nand ecclayout command that allows the ecclayout of
>> the current nand device to be changed during run time. This feature is
>> useful when using u-boot to write something to nand flash that will be
>> read by other applications, such as ROM bootloader, that expects a
>> different ECC layout. In that case, change the current nand device
>> ecclayout using the "nand ecclayout set" command before writing the
>> data to nand flash.
>>
>> Signed-off-by: WingMan Kwok <w-kwok2 at ti.com>
>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> Applied to u-boot-ti/master, thanks!
>

Sorry Tom, but the subj patch as
entire "[U-boot] [Patch v3 0/3] keystone: nand: add additional nand 
ecclayout" series
was completely replaced by "[U-boot] [Patch 0/3] Add support for NAND 
U-boot image upgrade" series
(http://lists.denx.de/pipermail/u-boot/2014-July/182956.html)
which has been applied already.

This patch is not needed.

-- 
Regards,
Ivan Khoronzhuk