[U-Boot] [PATCH v2 28/40] ARM: tegra: Enable PCIe on Beaver
Thierry Reding
thierry.reding at gmail.com
Tue Aug 26 17:34:16 CEST 2014
From: Thierry Reding <treding at nvidia.com>
The Beaver has an ethernet NIC connected to the PCIe bus. Enable the
PCIe controller and the network device driver so that the device can
boot over the network.
In addition the board has a mini-PCIe expansion slot.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
Changes in v2:
- move after Cardhu PCIe patch and move most code into that patch
- use proper set of PCIe power supplies
- use unit address in node name
arch/arm/dts/tegra30-beaver.dts | 245 ++++++++++++++++++++++++++++++++++++++++
include/configs/beaver.h | 10 ++
2 files changed, 255 insertions(+)
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
index 85e62e9db32e..4a4c07851202 100644
--- a/arch/arm/dts/tegra30-beaver.dts
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -23,6 +23,33 @@
reg = <0x80000000 0x7ff00000>;
};
+ pcie-controller at 00003000 {
+ status = "okay";
+
+ avdd-pexa-supply = <&ldo1_reg>;
+ vdd-pexa-supply = <&ldo1_reg>;
+ avdd-pexb-supply = <&ldo1_reg>;
+ vdd-pexb-supply = <&ldo1_reg>;
+ avdd-pex-pll-supply = <&ldo1_reg>;
+ avdd-plle-supply = <&ldo1_reg>;
+ vddio-pex-ctl-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+ pci at 1,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 2,0 {
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 3,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+ };
+
i2c at 7000c000 {
status = "okay";
clock-frequency = <100000>;
@@ -46,6 +73,110 @@
i2c at 7000d000 {
status = "okay";
clock-frequency = <100000>;
+
+ pmic: tps65911 at 2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_5v_in_reg>;
+ vcc2-supply = <&vdd_5v_in_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v_in_reg>;
+ vcc5-supply = <&vdd_5v_in_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_5v_in_reg>;
+ vccio-supply = <&vdd_5v_in_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
};
spi at 7000da00 {
@@ -81,4 +212,118 @@
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v_in_reg: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v_in";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ chargepump_5v_reg: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "chargepump_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ ddr_reg: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ vdd_5v_sata_reg: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_5v_sata";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ usb1_vbus_reg: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ usb3_vbus_reg: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ sys_3v3_reg: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "sys_3v3,vdd_3v3_alw";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ sys_3v3_pexs_reg: regulator at 7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "sys_3v3_pexs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_5v0_hdmi: regulator at 8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "+VDD_5V_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&sys_3v3_reg>;
+ };
+ };
};
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index ae831127985f..bc96f6438d3c 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -84,6 +84,16 @@
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_RTL8169
+
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
--
2.0.4
More information about the U-Boot
mailing list