[U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC

Steve Rae srae at broadcom.com
Tue Aug 26 18:27:49 CEST 2014



On 14-08-26 02:14 AM, Lukasz Majewski wrote:
> Hi Steve,
>
>>
>>
>> On 14-08-25 07:57 AM, Lukasz Majewski wrote:
>>> Hi Steve,
>>>
>>>> This series implements the "fastboot flash" command for eMMC
>>>> devices. It supports both raw and sparse images.
>>>>
>>>> NOTES:
>>>> - the support for the "fastboot flash" command is enabled with
>>>> CONFIG_FASTBOOT_FLASH
>>>> - the support for eMMC is enabled with
>>>> CONFIG_FASTBOOT_FLASH_MMC_DEV
>>>> - (future) the support for NAND would be enabled with
>>>> CONFIG_FASTBOOT_FLASH_NAND(???)
>>>>
>>>> This has been tested on ARMv7.
>>>>
>>>> ----
>>>>
>>>> This series depends on:
>>>>     http://patchwork.ozlabs.org/patch/379438/
>>>
>>> This patch is already applied.
>> Correct
>> (But it wasn't when I was preparing this....)
>>
>>>
>>>>     http://patchwork.ozlabs.org/patch/382443/ (to 382446)
>>>
>>> Could you resend the above patch series one more time?
>>>
>>>   From the links it seems that in PATCH 1/4 you add
>>> the ./common/aboot.c file and at PATCH 2/4 you remove it.
>>>
>>> Is this done on purpose?
>> yes: done on purpose (in order to see the history of the changes to
>> the file....) -- see the comments in the cover letter to that
>> patch-series!!!
>
> Ok, Now it is clear.
>
> Is fair as I know bsd-3L-clause license is compatible with GPL.
>
> However, to be 100% sure I'd like to ask Tom (as he has much more
> legal experience than me) to confirm that this code can be added to
> u-boot.
>
OK -- note that this "bsd-3L-clause" clause is almost identical to the 
existing "bsd-3-clause"....
Thanks, Steve
>>
>>>
>>> (I've also trimmed down the CC list).
>>>
>>>>
>>>> Changes in v5:
>>>> - use the common/aboot.c for the "sparse format" handling
>>>>
>>>> Changes in v4:
>>>> - rearranged this patchset so that "sparse_format.h" can be dropped
>>>> (if we cannot resolve the copyright/licensing issues)
>>>> - update mmc_get_dev(...) to get_dev("mmc",....)
>>>> - update printf() to puts() where applicable
>>>> - update debug string as per feedback
>>>> - rearranged "sparse format" support in this patchset, in order to
>>>> isolate...
>>>>
>>>> Changes in v3:
>>>> - remove most references to 'mmc',
>>>>     which leaves only one mmc specific function: mmc_get_dev()
>>>>
>>>> Changes in v2:
>>>> - split large function into three
>>>> - improved handling of response messages
>>>> - additional partition size checking when writing sparse image
>>>> - update README.android-fastboot file
>>>> - new in v2
>>>>
>>>> Steve Rae (4):
>>>>     usb/gadget: fastboot: add eMMC support for flash command
>>>>     usb/gadget: fastboot: add support for flash command
>>>>     usb/gadget: fastboot: minor cleanup
>>>>     usb/gadget: fastboot: implement sparse format
>>>>
>>>>    README                          | 10 +++++
>>>>    common/Makefile                 |  6 +++
>>>>    common/cmd_fastboot.c           |  7 +--
>>>>    common/fb_mmc.c                 | 95
>>>> +++++++++++++++++++++++++++++++++++++++++
>>>> doc/README.android-fastboot     |  5 ++-
>>>> drivers/usb/gadget/f_fastboot.c | 44 +++++++++++++++++--
>>>> include/fb_mmc.h                |  8 ++++ 7 files changed, 166
>>>> insertions(+), 9 deletions(-) create mode 100644 common/fb_mmc.c
>>>>    create mode 100644 include/fb_mmc.h
>>>>
>>>
>>>
>>>
>> Thanks, Steve
>
>
>


More information about the U-Boot mailing list