[U-Boot] [PATCH v6 0/4] Implement "fastboot flash" for eMMC
Steve Rae
srae at broadcom.com
Tue Aug 26 20:47:26 CEST 2014
This series implements the "fastboot flash" command for eMMC devices.
It supports both raw and sparse images.
NOTES:
- the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
This has been tested on ARMv7.
----
This series depends on:
http://patchwork.ozlabs.org/patch/382443/ (to 382446)
Changes in v6:
- printf() to error()
- fix spelling
- remove excess braces
Changes in v5:
- use the common/aboot.c for the "sparse format" handling
Changes in v4:
- rearranged this patchset so that "sparse_format.h" can be dropped (if we cannot
resolve the copyright/licensing issues)
- update mmc_get_dev(...) to get_dev("mmc",....)
- update printf() to puts() where applicable
- update debug string as per feedback
- rearranged "sparse format" support in this patchset, in order to isolate...
Changes in v3:
- remove most references to 'mmc',
which leaves only one mmc specific function: mmc_get_dev()
Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2
Steve Rae (4):
usb/gadget: fastboot: add eMMC support for flash command
usb/gadget: fastboot: add support for flash command
usb/gadget: fastboot: minor cleanup
usb/gadget: fastboot: implement sparse format
README | 10 +++++
common/Makefile | 6 +++
common/cmd_fastboot.c | 7 ++--
common/fb_mmc.c | 92 +++++++++++++++++++++++++++++++++++++++++
doc/README.android-fastboot | 5 ++-
drivers/usb/gadget/f_fastboot.c | 44 ++++++++++++++++++--
include/fb_mmc.h | 8 ++++
7 files changed, 163 insertions(+), 9 deletions(-)
create mode 100644 common/fb_mmc.c
create mode 100644 include/fb_mmc.h
--
1.8.5
More information about the U-Boot
mailing list