[U-Boot] uboot env in mmc partition

Naitik Amin Naitik.Amin at ametek.com
Fri Aug 29 21:06:22 CEST 2014


HI there,

I recently made changes to my system, where I created a new partition on 
my mmc. (mmcblk0p4)

Then i dd'd a uboot env image into this partition, updated the 
fw_env.config to point to /dev/mmcblk0p4. At this point, my fw_printenv 
and fw_setenv work good. So as a next step, I am tried to modify uboot to 
make it point to my env image in my new partition.

I made below changes to my config header and rebuilt the uboot. On doing 
printenv from uboot, I dont see the same env that I pushed it from linux, 
infact I see it as its defined in the config header.

Can some one help ?

/* environment setting for MMC */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV          0       /* device 0 */
#define CONFIG_SYS_MMC_ENV_PART         4
#define CONFIG_ENV_OFFSET               0       /* just after the MBR */
#endif




More information about the U-Boot mailing list