[U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support

Fabio Estevam festevam at gmail.com
Fri Aug 29 22:19:11 CEST 2014


Hi Stefano,

On Mon, Aug 25, 2014 at 5:11 PM, Fabio Estevam <festevam at gmail.com> wrote:
> On Mon, Aug 25, 2014 at 4:50 PM, Marek Vasut <marex at denx.de> wrote:
>> On Monday, August 25, 2014 at 07:26:46 PM, Fabio Estevam wrote:
>>> Tested with an Intel Wireless PCI 7260HMW card:
>>>
>>> U-Boot 2014.10-rc1-16576-g4a8a8a8-dirty (Aug 23 2014 - 16:05:11)
>>>
>>> CPU:   Freescale i.MX6SX rev1.0 at 792 MHz
>>> Reset cause: WDOG
>>> Board: MX6SX SABRE SDB
>>> I2C:   ready
>>> DRAM:  1 GiB
>>> MMC:   FSL_SDHC: 0
>>>   00:01.0     - 16c3:abcd - Bridge device
>>>    01:00.0    - 8086:08b1 - Network controller
>>>
>>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>>
>> Should this output be really part of the commit message?
>
> Personally I don't see any problem with it, but if Stefano prefers I
> can remove it and send a v4.

Please let me know if you want me to resend this series or if you are
fine with it.

Thanks


More information about the U-Boot mailing list