[U-Boot] [PATCH 0/3] ARM: Zynq: Add ZYBO board

[Peter Crosthwaite]

On Fri, Aug 29, 2014 at 9:07 PM, Michal Simek <michal.simek at xilinx.com> wrote:
> On 08/28/2014 01:16 PM, Peter Crosthwaite wrote:
>> Hi Michal, Steven,
>>
>> This series adds the ZYBO board to u-boot. Some components were originally
>> contributed to the digilent u-boot tree (P2). Thanks to Steven Wang. The
>> original code had a custom u-boot env specific for Zybo but I have dropped
>> that. I have added DTS support - which in general seems to have appeared in
>> u-boot since the original digilent work (P1). The new configury is P3.
>>
>> Regards,
>> Peter
>>
>> Peter Crosthwaite (2):
>>   arm: dts: zynq: Add digilent ZYBO board dts
>>   kconfig: zynq: Add ZYBO board
>>
>> Tinghui Wang (1):
>>   configs: zynq: Add config support for ZYBO
>>
>>  arch/arm/Kconfig            |  3 +++
>>  arch/arm/dts/Makefile       |  1 +
>>  arch/arm/dts/zynq-zybo.dts  | 23 +++++++++++++++++++++++
>>  board/xilinx/zynq/Kconfig   | 24 ++++++++++++++++++++++++
>>  configs/zynq_zybo_defconfig |  3 +++
>>  include/configs/zynq_zybo.h | 31 +++++++++++++++++++++++++++++++
>>  6 files changed, 85 insertions(+)
>>  create mode 100644 arch/arm/dts/zynq-zybo.dts
>>  create mode 100644 configs/zynq_zybo_defconfig
>>  create mode 100644 include/configs/zynq_zybo.h
>>
>
> Applied all with that small fix in 2/3 reported by Jagan.

Thanks,

Regards,
Peter

> I have also tested it on real HW.
>
> Thanks,
> Michal
>