[U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support

nitin.garg at freescale.com nitin.garg at freescale.com
Sun Aug 31 17:03:27 CEST 2014


From: Nitin Garg <nitin.garg at freescale.com>

Support CPU temperature sensors on i.MX6 SoC.

Signed-off-by: Nitin Garg <nitin.garg at freescale.com>
---
 arch/arm/cpu/armv7/mx6/soc.c             |  137 +++++++-
 arch/arm/imx-common/cpu.c                |    7 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h |  543 +++++++++++++++++++++++++++++-
 arch/arm/include/asm/arch-mx6/imx-regs.h |    9 +-
 4 files changed, 692 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index ac84a1f..8aacdaf 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2007
  * Sascha Hauer, Pengutronix
  *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -35,6 +35,18 @@ struct scu_regs {
 	u32	fpga_rev;
 };
 
+#define TEMPERATURE_MIN		-40
+#define TEMPERATURE_HOT		80
+#define TEMPERATURE_MAX		125
+#define FACTOR1			15976
+#define FACTOR2			4297157
+#define MEASURE_FREQ		327
+
+#define REG_VALUE_TO_CEL(ratio, raw) \
+	((raw_n40c - raw) * 100 / ratio - 40)
+
+static unsigned int fuse = ~0;
+
 u32 get_nr_cpus(void)
 {
 	struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
@@ -218,6 +230,129 @@ static void imx_set_wdog_powerdown(bool enable)
 	writew(enable, &wdog2->wmcr);
 }
 
+static int read_cpu_temperature(void)
+{
+	int temperature;
+	unsigned int ccm_ccgr2;
+	unsigned int reg, tmp;
+	unsigned int raw_25c, raw_n40c, ratio;
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse_bank1 =
+			(struct fuse_bank1_regs *)bank->fuse_regs;
+
+	/* need to make sure pll3 is enabled for thermal sensor */
+	if ((readl(&anatop->usb1_pll_480_ctrl) &
+			BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
+		/* enable pll's power */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
+				&anatop->usb1_pll_480_ctrl_set);
+		writel(0x80, &anatop->ana_misc2_clr);
+		/* wait for pll lock */
+		while ((readl(&anatop->usb1_pll_480_ctrl) &
+			BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
+			;
+		/* disable bypass */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
+				&anatop->usb1_pll_480_ctrl_clr);
+		/* enable pll output */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
+				&anatop->usb1_pll_480_ctrl_set);
+	}
+
+	ccm_ccgr2 = readl(&mxc_ccm->CCGR2);
+	/* enable OCOTP_CTRL clock in CCGR2 */
+	writel(ccm_ccgr2 | MXC_CCM_CCGR2_OCOTP_CTRL_MASK, &mxc_ccm->CCGR2);
+	fuse = readl(&fuse_bank1->ana1);
+
+	/* restore CCGR2 */
+	writel(ccm_ccgr2, &mxc_ccm->CCGR2);
+
+	if (fuse == 0 || fuse == 0xffffffff || (fuse & 0xfff00000) == 0)
+		return TEMPERATURE_MIN;
+
+	/*
+	 * fuse data layout:
+	 * [31:20] sensor value @ 25C
+	 * [19:8] sensor value of hot
+	 * [7:0] hot temperature value
+	 */
+	raw_25c = fuse >> 20;
+
+	/*
+	 * The universal equation for thermal sensor
+	 * is slope = 0.4297157 - (0.0015976 * 25C fuse),
+	 * here we convert them to integer to make them
+	 * easy for counting, FACTOR1 is 15976,
+	 * FACTOR2 is 4297157. Our ratio = -100 * slope
+	 */
+	ratio = ((FACTOR1 * raw_25c - FACTOR2) + 50000) / 100000;
+
+	debug("Thermal sensor with ratio = %d\n", ratio);
+
+	raw_n40c = raw_25c + (13 * ratio) / 20;
+
+	/*
+	 * now we only use single measure, every time we read
+	 * the temperature, we will power on/down anadig thermal
+	 * module
+	 */
+	writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
+	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+
+	/* write measure freq */
+	reg = readl(&anatop->tempsense1);
+	reg &= ~BM_ANADIG_TEMPSENSE1_MEASURE_FREQ;
+	reg |= MEASURE_FREQ;
+	writel(reg, &anatop->tempsense1);
+
+	writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
+	writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+	writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);
+
+	while ((readl(&anatop->tempsense0) &
+			BM_ANADIG_TEMPSENSE0_FINISHED) == 0)
+		udelay(10000);
+
+	reg = readl(&anatop->tempsense0);
+	tmp = (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+		>> BP_ANADIG_TEMPSENSE0_TEMP_VALUE;
+	writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+
+	if (tmp <= raw_n40c)
+		temperature = REG_VALUE_TO_CEL(ratio, tmp);
+	else
+		temperature = TEMPERATURE_MIN;
+	/* power down anatop thermal sensor */
+	writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
+	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);
+
+	return temperature;
+}
+
+void check_cpu_temperature(void)
+{
+	int cpu_tmp = 0;
+
+	cpu_tmp = read_cpu_temperature();
+	while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) {
+		if (cpu_tmp >= TEMPERATURE_HOT) {
+			printf("CPU is %d C, too hot to boot, waiting...\n",
+				cpu_tmp);
+			udelay(5000000);
+			cpu_tmp = read_cpu_temperature();
+		} else
+			break;
+	}
+	if (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX)
+		printf("CPU:   Temperature %d C, calibration data: 0x%x\n",
+			cpu_tmp, fuse);
+	else
+		printf("CPU:   Temperature: can't get valid data or fuse not programmed!\n");
+}
+
 static void set_ahb_rate(u32 val)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index ed826a0..addd6eb 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2007
  * Sascha Hauer, Pengutronix
  *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -139,6 +139,11 @@ int print_cpuinfo(void)
 		(cpurev & 0x000F0) >> 4,
 		(cpurev & 0x0000F) >> 0,
 		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+#if defined(CONFIG_MX6)
+	check_cpu_temperature();
+#endif
+
 	printf("Reset cause: %s\n", get_reset_cause());
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index e67b5b9..66a7cea 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011-2014 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -1061,4 +1061,545 @@ struct mxc_ccm_reg {
 #define BF_ANADIG_PFD_528_PFD0_FRAC(v)  \
 	(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
 
+#define HW_ANADIG_REG_1P1	(0x00000110)
+#define HW_ANADIG_REG_1P1_SET	(0x00000114)
+#define HW_ANADIG_REG_1P1_CLR	(0x00000118)
+#define HW_ANADIG_REG_1P1_TOG	(0x0000011c)
+
+#define BP_ANADIG_REG_1P1_RSVD2      18
+#define BM_ANADIG_REG_1P1_RSVD2 0xFFFC0000
+#define BF_ANADIG_REG_1P1_RSVD2(v) \
+	(((v) << 18) & BM_ANADIG_REG_1P1_RSVD2)
+#define BM_ANADIG_REG_1P1_OK_VDD1P1 0x00020000
+#define BM_ANADIG_REG_1P1_BO_VDD1P1 0x00010000
+#define BP_ANADIG_REG_1P1_RSVD1      13
+#define BM_ANADIG_REG_1P1_RSVD1 0x0000E000
+#define BF_ANADIG_REG_1P1_RSVD1(v)  \
+	(((v) << 13) & BM_ANADIG_REG_1P1_RSVD1)
+#define BP_ANADIG_REG_1P1_OUTPUT_TRG      8
+#define BM_ANADIG_REG_1P1_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_1P1_OUTPUT_TRG(v)  \
+	(((v) << 8) & BM_ANADIG_REG_1P1_OUTPUT_TRG)
+#define BM_ANADIG_REG_1P1_RSVD0 0x00000080
+#define BP_ANADIG_REG_1P1_BO_OFFSET      4
+#define BM_ANADIG_REG_1P1_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_1P1_BO_OFFSET(v)  \
+	(((v) << 4) & BM_ANADIG_REG_1P1_BO_OFFSET)
+#define BM_ANADIG_REG_1P1_ENABLE_PULLDOWN 0x00000008
+#define BM_ANADIG_REG_1P1_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_1P1_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_1P1_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_3P0	(0x00000120)
+#define HW_ANADIG_REG_3P0_SET	(0x00000124)
+#define HW_ANADIG_REG_3P0_CLR	(0x00000128)
+#define HW_ANADIG_REG_3P0_TOG	(0x0000012c)
+
+#define BP_ANADIG_REG_3P0_RSVD2      18
+#define BM_ANADIG_REG_3P0_RSVD2 0xFFFC0000
+#define BF_ANADIG_REG_3P0_RSVD2(v) \
+	(((v) << 18) & BM_ANADIG_REG_3P0_RSVD2)
+#define BM_ANADIG_REG_3P0_OK_VDD3P0 0x00020000
+#define BM_ANADIG_REG_3P0_BO_VDD3P0 0x00010000
+#define BP_ANADIG_REG_3P0_RSVD1      13
+#define BM_ANADIG_REG_3P0_RSVD1 0x0000E000
+#define BF_ANADIG_REG_3P0_RSVD1(v)  \
+	(((v) << 13) & BM_ANADIG_REG_3P0_RSVD1)
+#define BP_ANADIG_REG_3P0_OUTPUT_TRG      8
+#define BM_ANADIG_REG_3P0_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_3P0_OUTPUT_TRG(v)  \
+	(((v) << 8) & BM_ANADIG_REG_3P0_OUTPUT_TRG)
+#define BM_ANADIG_REG_3P0_VBUS_SEL 0x00000080
+#define BP_ANADIG_REG_3P0_BO_OFFSET      4
+#define BM_ANADIG_REG_3P0_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_3P0_BO_OFFSET(v)  \
+	(((v) << 4) & BM_ANADIG_REG_3P0_BO_OFFSET)
+#define BM_ANADIG_REG_3P0_RSVD0 0x00000008
+#define BM_ANADIG_REG_3P0_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_3P0_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_3P0_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_2P5	(0x00000130)
+#define HW_ANADIG_REG_2P5_SET	(0x00000134)
+#define HW_ANADIG_REG_2P5_CLR	(0x00000138)
+#define HW_ANADIG_REG_2P5_TOG	(0x0000013c)
+
+#define BP_ANADIG_REG_2P5_RSVD2      19
+#define BM_ANADIG_REG_2P5_RSVD2 0xFFF80000
+#define BF_ANADIG_REG_2P5_RSVD2(v) \
+	(((v) << 19) & BM_ANADIG_REG_2P5_RSVD2)
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x00040000
+#define BM_ANADIG_REG_2P5_OK_VDD2P5 0x00020000
+#define BM_ANADIG_REG_2P5_BO_VDD2P5 0x00010000
+#define BP_ANADIG_REG_2P5_RSVD1      13
+#define BM_ANADIG_REG_2P5_RSVD1 0x0000E000
+#define BF_ANADIG_REG_2P5_RSVD1(v)  \
+	(((v) << 13) & BM_ANADIG_REG_2P5_RSVD1)
+#define BP_ANADIG_REG_2P5_OUTPUT_TRG      8
+#define BM_ANADIG_REG_2P5_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_2P5_OUTPUT_TRG(v)  \
+	(((v) << 8) & BM_ANADIG_REG_2P5_OUTPUT_TRG)
+#define BM_ANADIG_REG_2P5_RSVD0 0x00000080
+#define BP_ANADIG_REG_2P5_BO_OFFSET      4
+#define BM_ANADIG_REG_2P5_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_2P5_BO_OFFSET(v)  \
+	(((v) << 4) & BM_ANADIG_REG_2P5_BO_OFFSET)
+#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x00000008
+#define BM_ANADIG_REG_2P5_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_2P5_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_2P5_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_CORE	(0x00000140)
+#define HW_ANADIG_REG_CORE_SET	(0x00000144)
+#define HW_ANADIG_REG_CORE_CLR	(0x00000148)
+#define HW_ANADIG_REG_CORE_TOG	(0x0000014c)
+
+#define BM_ANADIG_REG_CORE_REF_SHIFT 0x80000000
+#define BM_ANADIG_REG_CORE_RSVD0 0x40000000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
+#define BP_ANADIG_REG_CORE_RAMP_RATE      27
+#define BM_ANADIG_REG_CORE_RAMP_RATE 0x18000000
+#define BF_ANADIG_REG_CORE_RAMP_RATE(v)  \
+	(((v) << 27) & BM_ANADIG_REG_CORE_RAMP_RATE)
+#define BP_ANADIG_REG_CORE_REG2_ADJ      23
+#define BM_ANADIG_REG_CORE_REG2_ADJ 0x07800000
+#define BF_ANADIG_REG_CORE_REG2_ADJ(v)  \
+	(((v) << 23) & BM_ANADIG_REG_CORE_REG2_ADJ)
+#define BP_ANADIG_REG_CORE_REG2_TRG      18
+#define BM_ANADIG_REG_CORE_REG2_TRG 0x007C0000
+#define BF_ANADIG_REG_CORE_REG2_TRG(v)  \
+	(((v) << 18) & BM_ANADIG_REG_CORE_REG2_TRG)
+#define BP_ANADIG_REG_CORE_REG1_ADJ      14
+#define BM_ANADIG_REG_CORE_REG1_ADJ 0x0003C000
+#define BF_ANADIG_REG_CORE_REG1_ADJ(v)  \
+	(((v) << 14) & BM_ANADIG_REG_CORE_REG1_ADJ)
+#define BP_ANADIG_REG_CORE_REG1_TRG      9
+#define BM_ANADIG_REG_CORE_REG1_TRG 0x00003E00
+#define BF_ANADIG_REG_CORE_REG1_TRG(v)  \
+	(((v) << 9) & BM_ANADIG_REG_CORE_REG1_TRG)
+#define BP_ANADIG_REG_CORE_REG0_ADJ      5
+#define BM_ANADIG_REG_CORE_REG0_ADJ 0x000001E0
+#define BF_ANADIG_REG_CORE_REG0_ADJ(v)  \
+	(((v) << 5) & BM_ANADIG_REG_CORE_REG0_ADJ)
+#define BP_ANADIG_REG_CORE_REG0_TRG      0
+#define BM_ANADIG_REG_CORE_REG0_TRG 0x0000001F
+#define BF_ANADIG_REG_CORE_REG0_TRG(v)  \
+	(((v) << 0) & BM_ANADIG_REG_CORE_REG0_TRG)
+
+#define HW_ANADIG_ANA_MISC0	(0x00000150)
+#define HW_ANADIG_ANA_MISC0_SET	(0x00000154)
+#define HW_ANADIG_ANA_MISC0_CLR	(0x00000158)
+#define HW_ANADIG_ANA_MISC0_TOG	(0x0000015c)
+
+#define BP_ANADIG_ANA_MISC0_RSVD2      29
+#define BM_ANADIG_ANA_MISC0_RSVD2 0xE0000000
+#define BF_ANADIG_ANA_MISC0_RSVD2(v) \
+	(((v) << 29) & BM_ANADIG_ANA_MISC0_RSVD2)
+#define BP_ANADIG_ANA_MISC0_CLKGATE_DELAY      26
+#define BM_ANADIG_ANA_MISC0_CLKGATE_DELAY 0x1C000000
+#define BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(v)  \
+	(((v) << 26) & BM_ANADIG_ANA_MISC0_CLKGATE_DELAY)
+#define BM_ANADIG_ANA_MISC0_CLKGATE_CTRL 0x02000000
+#define BP_ANADIG_ANA_MISC0_ANAMUX      21
+#define BM_ANADIG_ANA_MISC0_ANAMUX 0x01E00000
+#define BF_ANADIG_ANA_MISC0_ANAMUX(v)  \
+	(((v) << 21) & BM_ANADIG_ANA_MISC0_ANAMUX)
+#define BM_ANADIG_ANA_MISC0_ANAMUX_EN 0x00100000
+#define BP_ANADIG_ANA_MISC0_WBCP_VPW_THRESH      18
+#define BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 0x000C0000
+#define BF_ANADIG_ANA_MISC0_WBCP_VPW_THRESH(v)  \
+	(((v) << 18) & BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH)
+#define BM_ANADIG_ANA_MISC0_OSC_XTALOK_EN 0x00020000
+#define BM_ANADIG_ANA_MISC0_OSC_XTALOK 0x00010000
+#define BP_ANADIG_ANA_MISC0_OSC_I      14
+#define BM_ANADIG_ANA_MISC0_OSC_I 0x0000C000
+#define BF_ANADIG_ANA_MISC0_OSC_I(v)  \
+	(((v) << 14) & BM_ANADIG_ANA_MISC0_OSC_I)
+#define BM_ANADIG_ANA_MISC0_RTC_RINGOSC_EN 0x00002000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x00001000
+#define BP_ANADIG_ANA_MISC0_RSVD0      10
+#define BM_ANADIG_ANA_MISC0_RSVD0 0x00000C00
+#define BF_ANADIG_ANA_MISC0_RSVD0(v)  \
+	(((v) << 10) & BM_ANADIG_ANA_MISC0_RSVD0)
+#define BP_ANADIG_ANA_MISC0_REFTOP_BIAS_TST      8
+#define BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 0x00000300
+#define BF_ANADIG_ANA_MISC0_REFTOP_BIAS_TST(v)  \
+	(((v) << 8) & BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST)
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGUP 0x00000080
+#define BP_ANADIG_ANA_MISC0_REFTOP_VBGADJ      4
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x00000070
+#define BF_ANADIG_ANA_MISC0_REFTOP_VBGADJ(v)  \
+	(((v) << 4) & BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ)
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
+#define BM_ANADIG_ANA_MISC0_REFTOP_LOWPOWER 0x00000004
+#define BM_ANADIG_ANA_MISC0_REFTOP_PWDVBGUP 0x00000002
+#define BM_ANADIG_ANA_MISC0_REFTOP_PWD 0x00000001
+
+#define HW_ANADIG_ANA_MISC1	(0x00000160)
+#define HW_ANADIG_ANA_MISC1_SET	(0x00000164)
+#define HW_ANADIG_ANA_MISC1_CLR	(0x00000168)
+#define HW_ANADIG_ANA_MISC1_TOG	(0x0000016c)
+
+#define BM_ANADIG_ANA_MISC1_IRQ_DIG_BO 0x80000000
+#define BM_ANADIG_ANA_MISC1_IRQ_ANA_BO 0x40000000
+#define BM_ANADIG_ANA_MISC1_IRQ_TEMPSENSE_BO 0x20000000
+#define BP_ANADIG_ANA_MISC1_RSVD0      14
+#define BM_ANADIG_ANA_MISC1_RSVD0 0x1FFFC000
+#define BF_ANADIG_ANA_MISC1_RSVD0(v)  \
+	(((v) << 14) & BM_ANADIG_ANA_MISC1_RSVD0)
+#define BM_ANADIG_ANA_MISC1_LVDSCLK2_IBEN 0x00002000
+#define BM_ANADIG_ANA_MISC1_LVDSCLK1_IBEN 0x00001000
+#define BM_ANADIG_ANA_MISC1_LVDSCLK2_OBEN 0x00000800
+#define BM_ANADIG_ANA_MISC1_LVDSCLK1_OBEN 0x00000400
+#define BP_ANADIG_ANA_MISC1_LVDS2_CLK_SEL      5
+#define BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 0x000003E0
+#define BF_ANADIG_ANA_MISC1_LVDS2_CLK_SEL(v)  \
+	(((v) << 5) & BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL)
+#define BP_ANADIG_ANA_MISC1_LVDS1_CLK_SEL      0
+#define BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0x0000001F
+#define BF_ANADIG_ANA_MISC1_LVDS1_CLK_SEL(v)  \
+	(((v) << 0) & BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL)
+
+#define HW_ANADIG_ANA_MISC2	(0x00000170)
+#define HW_ANADIG_ANA_MISC2_SET	(0x00000174)
+#define HW_ANADIG_ANA_MISC2_CLR	(0x00000178)
+#define HW_ANADIG_ANA_MISC2_TOG	(0x0000017c)
+
+#define BP_ANADIG_ANA_MISC2_CONTROL3      30
+#define BM_ANADIG_ANA_MISC2_CONTROL3 0xC0000000
+#define BF_ANADIG_ANA_MISC2_CONTROL3(v) \
+	(((v) << 30) & BM_ANADIG_ANA_MISC2_CONTROL3)
+#define BP_ANADIG_ANA_MISC2_REG2_STEP_TIME      28
+#define BM_ANADIG_ANA_MISC2_REG2_STEP_TIME 0x30000000
+#define BF_ANADIG_ANA_MISC2_REG2_STEP_TIME(v)  \
+	(((v) << 28) & BM_ANADIG_ANA_MISC2_REG2_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG1_STEP_TIME      26
+#define BM_ANADIG_ANA_MISC2_REG1_STEP_TIME 0x0C000000
+#define BF_ANADIG_ANA_MISC2_REG1_STEP_TIME(v)  \
+	(((v) << 26) & BM_ANADIG_ANA_MISC2_REG1_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG0_STEP_TIME      24
+#define BM_ANADIG_ANA_MISC2_REG0_STEP_TIME 0x03000000
+#define BF_ANADIG_ANA_MISC2_REG0_STEP_TIME(v)  \
+	(((v) << 24) & BM_ANADIG_ANA_MISC2_REG0_STEP_TIME)
+#define BM_ANADIG_ANA_MISC2_CONTROL2 0x00800000
+#define BM_ANADIG_ANA_MISC2_REG2_OK 0x00400000
+#define BM_ANADIG_ANA_MISC2_REG2_ENABLE_BO 0x00200000
+#define BM_ANADIG_ANA_MISC2_RSVD2 0x00100000
+#define BM_ANADIG_ANA_MISC2_REG2_BO_STATUS 0x00080000
+#define BP_ANADIG_ANA_MISC2_REG2_BO_OFFSET      16
+#define BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET 0x00070000
+#define BF_ANADIG_ANA_MISC2_REG2_BO_OFFSET(v)  \
+	(((v) << 16) & BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL1 0x00008000
+#define BM_ANADIG_ANA_MISC2_REG1_OK 0x00004000
+#define BM_ANADIG_ANA_MISC2_REG1_ENABLE_BO 0x00002000
+#define BM_ANADIG_ANA_MISC2_RSVD1 0x00001000
+#define BM_ANADIG_ANA_MISC2_REG1_BO_STATUS 0x00000800
+#define BP_ANADIG_ANA_MISC2_REG1_BO_OFFSET      8
+#define BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET 0x00000700
+#define BF_ANADIG_ANA_MISC2_REG1_BO_OFFSET(v)  \
+	(((v) << 8) & BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL0 0x00000080
+#define BM_ANADIG_ANA_MISC2_REG0_OK 0x00000040
+#define BM_ANADIG_ANA_MISC2_REG0_ENABLE_BO 0x00000020
+#define BM_ANADIG_ANA_MISC2_RSVD0 0x00000010
+#define BM_ANADIG_ANA_MISC2_REG0_BO_STATUS 0x00000008
+#define BP_ANADIG_ANA_MISC2_REG0_BO_OFFSET      0
+#define BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0x00000007
+#define BF_ANADIG_ANA_MISC2_REG0_BO_OFFSET(v)  \
+	(((v) << 0) & BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET)
+
+#define HW_ANADIG_TEMPSENSE0	(0x00000180)
+#define HW_ANADIG_TEMPSENSE0_SET	(0x00000184)
+#define HW_ANADIG_TEMPSENSE0_CLR	(0x00000188)
+#define HW_ANADIG_TEMPSENSE0_TOG	(0x0000018c)
+
+#define BP_ANADIG_TEMPSENSE0_ALARM_VALUE      20
+#define BM_ANADIG_TEMPSENSE0_ALARM_VALUE 0xFFF00000
+#define BF_ANADIG_TEMPSENSE0_ALARM_VALUE(v) \
+	(((v) << 20) & BM_ANADIG_TEMPSENSE0_ALARM_VALUE)
+#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE      8
+#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00
+#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v)  \
+	(((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080
+#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040
+#define BP_ANADIG_TEMPSENSE0_VBGADJ      3
+#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038
+#define BF_ANADIG_TEMPSENSE0_VBGADJ(v)  \
+	(((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ)
+#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004
+#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002
+#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001
+
+#define HW_ANADIG_TEMPSENSE1	(0x00000190)
+#define HW_ANADIG_TEMPSENSE1_SET	(0x00000194)
+#define HW_ANADIG_TEMPSENSE1_CLR	(0x00000198)
+#define HW_ANADIG_TEMPSENSE1_TOG	(0x0000019c)
+
+#define BP_ANADIG_TEMPSENSE1_RSVD0      16
+#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000
+#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \
+	(((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0)
+#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ      0
+#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF
+#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v)  \
+	(((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ)
+
+#define HW_ANADIG_USB1_VBUS_DETECT	(0x000001a0)
+#define HW_ANADIG_USB1_VBUS_DETECT_SET	(0x000001a4)
+#define HW_ANADIG_USB1_VBUS_DETECT_CLR	(0x000001a8)
+#define HW_ANADIG_USB1_VBUS_DETECT_TOG	(0x000001ac)
+
+#define BM_ANADIG_USB1_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD2      28
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD2 0x70000000
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD2(v)  \
+	(((v) << 28) & BM_ANADIG_USB1_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB1_VBUS_DETECT_CHARGE_VBUS 0x08000000
+#define BM_ANADIG_USB1_VBUS_DETECT_DISCHARGE_VBUS 0x04000000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD1      21
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD1 0x03E00000
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD1(v)  \
+	(((v) << 21) & BM_ANADIG_USB1_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_TO_B 0x00040000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD0      8
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD0 0x0003FF00
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD0(v)  \
+	(((v) << 8) & BM_ANADIG_USB1_VBUS_DETECT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_OVERRIDE 0x00000080
+#define BM_ANADIG_USB1_VBUS_DETECT_AVALID_OVERRIDE 0x00000040
+#define BM_ANADIG_USB1_VBUS_DETECT_BVALID_OVERRIDE 0x00000020
+#define BM_ANADIG_USB1_VBUS_DETECT_SESSEND_OVERRIDE 0x00000010
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUS_OVERRIDE_EN 0x00000008
+#define BP_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH      0
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0x00000007
+#define BF_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v)  \
+	(((v) << 0) & BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH)
+
+#define HW_ANADIG_USB1_CHRG_DETECT	(0x000001b0)
+#define HW_ANADIG_USB1_CHRG_DETECT_SET	(0x000001b4)
+#define HW_ANADIG_USB1_CHRG_DETECT_CLR	(0x000001b8)
+#define HW_ANADIG_USB1_CHRG_DETECT_TOG	(0x000001bc)
+
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD2      24
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD2 0xFF000000
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD2(v) \
+	(((v) << 24) & BM_ANADIG_USB1_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB1_CHRG_DETECT_BGR_BIAS 0x00800000
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD1      21
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD1 0x00600000
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD1(v)  \
+	(((v) << 21) & BM_ANADIG_USB1_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB1_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B 0x00080000
+#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CONTACT 0x00040000
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD0      1
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD0 0x0003FFFE
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD0(v)  \
+	(((v) << 1) & BM_ANADIG_USB1_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DETECT_FORCE_DETECT 0x00000001
+
+#define HW_ANADIG_USB1_VBUS_DET_STAT	(0x000001c0)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_SET	(0x000001c4)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_CLR	(0x000001c8)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_TOG	(0x000001cc)
+
+#define BP_ANADIG_USB1_VBUS_DET_STAT_RSVD0      4
+#define BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB1_VBUS_DET_STAT_RSVD0(v) \
+	(((v) << 4) & BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID 0x00000008
+#define BM_ANADIG_USB1_VBUS_DET_STAT_AVALID 0x00000004
+#define BM_ANADIG_USB1_VBUS_DET_STAT_BVALID 0x00000002
+#define BM_ANADIG_USB1_VBUS_DET_STAT_SESSEND 0x00000001
+
+#define HW_ANADIG_USB1_CHRG_DET_STAT	(0x000001d0)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_SET	(0x000001d4)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_CLR	(0x000001d8)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_TOG	(0x000001dc)
+
+#define BP_ANADIG_USB1_CHRG_DET_STAT_RSVD0      4
+#define BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB1_CHRG_DET_STAT_RSVD0(v) \
+	(((v) << 4) & BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DET_STAT_DP_STATE 0x00000008
+#define BM_ANADIG_USB1_CHRG_DET_STAT_DM_STATE 0x00000004
+#define BM_ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED 0x00000002
+#define BM_ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+
+#define HW_ANADIG_USB1_LOOPBACK	(0x000001e0)
+#define HW_ANADIG_USB1_LOOPBACK_SET	(0x000001e4)
+#define HW_ANADIG_USB1_LOOPBACK_CLR	(0x000001e8)
+#define HW_ANADIG_USB1_LOOPBACK_TOG	(0x000001ec)
+
+#define BP_ANADIG_USB1_LOOPBACK_RSVD0      9
+#define BM_ANADIG_USB1_LOOPBACK_RSVD0 0xFFFFFE00
+#define BF_ANADIG_USB1_LOOPBACK_RSVD0(v) \
+	(((v) << 9) & BM_ANADIG_USB1_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST1 0x00000100
+#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST0 0x00000080
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HIZ 0x00000040
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN 0x00000020
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_LS_MODE 0x00000010
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HS_MODE 0x00000008
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 0x00000004
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST0 0x00000002
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_TESTSTART 0x00000001
+
+#define HW_ANADIG_USB1_MISC	(0x000001f0)
+#define HW_ANADIG_USB1_MISC_SET	(0x000001f4)
+#define HW_ANADIG_USB1_MISC_CLR	(0x000001f8)
+#define HW_ANADIG_USB1_MISC_TOG	(0x000001fc)
+
+#define BM_ANADIG_USB1_MISC_RSVD1 0x80000000
+#define BM_ANADIG_USB1_MISC_EN_CLK_UTMI 0x40000000
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS 0x20000000
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS 0x10000000
+#define BM_ANADIG_USB1_MISC_RX_RXD_FS 0x08000000
+#define BM_ANADIG_USB1_MISC_RX_SQUELCH 0x04000000
+#define BM_ANADIG_USB1_MISC_RX_DISCON_DET 0x02000000
+#define BM_ANADIG_USB1_MISC_RX_HS_DATA 0x01000000
+#define BP_ANADIG_USB1_MISC_RSVD0      2
+#define BM_ANADIG_USB1_MISC_RSVD0 0x00FFFFFC
+#define BF_ANADIG_USB1_MISC_RSVD0(v)  \
+	(((v) << 2) & BM_ANADIG_USB1_MISC_RSVD0)
+#define BM_ANADIG_USB1_MISC_EN_DEGLITCH 0x00000002
+#define BM_ANADIG_USB1_MISC_HS_USE_EXTERNAL_R 0x00000001
+
+#define HW_ANADIG_USB2_VBUS_DETECT	(0x00000200)
+#define HW_ANADIG_USB2_VBUS_DETECT_SET	(0x00000204)
+#define HW_ANADIG_USB2_VBUS_DETECT_CLR	(0x00000208)
+#define HW_ANADIG_USB2_VBUS_DETECT_TOG	(0x0000020c)
+
+#define BM_ANADIG_USB2_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD2      28
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD2 0x70000000
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD2(v)  \
+	(((v) << 28) & BM_ANADIG_USB2_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB2_VBUS_DETECT_CHARGE_VBUS 0x08000000
+#define BM_ANADIG_USB2_VBUS_DETECT_DISCHARGE_VBUS 0x04000000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD1      21
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD1 0x03E00000
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD1(v)  \
+	(((v) << 21) & BM_ANADIG_USB2_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_TO_B 0x00040000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD0      3
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD0 0x0003FFF8
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD0(v)  \
+	(((v) << 3) & BM_ANADIG_USB2_VBUS_DETECT_RSVD0)
+#define BP_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH      0
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0x00000007
+#define BF_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v)  \
+	(((v) << 0) & BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH)
+
+#define HW_ANADIG_USB2_CHRG_DETECT	(0x00000210)
+#define HW_ANADIG_USB2_CHRG_DETECT_SET	(0x00000214)
+#define HW_ANADIG_USB2_CHRG_DETECT_CLR	(0x00000218)
+#define HW_ANADIG_USB2_CHRG_DETECT_TOG	(0x0000021c)
+
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD2      24
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD2 0xFF000000
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD2(v) \
+	(((v) << 24) & BM_ANADIG_USB2_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB2_CHRG_DETECT_BGR_BIAS 0x00800000
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD1      21
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD1 0x00600000
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD1(v)  \
+	(((v) << 21) & BM_ANADIG_USB2_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
+#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CONTACT 0x00040000
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD0      1
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD0 0x0003FFFE
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD0(v)  \
+	(((v) << 1) & BM_ANADIG_USB2_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DETECT_FORCE_DETECT 0x00000001
+
+#define HW_ANADIG_USB2_VBUS_DET_STAT	(0x00000220)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_SET	(0x00000224)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_CLR	(0x00000228)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_TOG	(0x0000022c)
+
+#define BP_ANADIG_USB2_VBUS_DET_STAT_RSVD0      4
+#define BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB2_VBUS_DET_STAT_RSVD0(v) \
+	(((v) << 4) & BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID 0x00000008
+#define BM_ANADIG_USB2_VBUS_DET_STAT_AVALID 0x00000004
+#define BM_ANADIG_USB2_VBUS_DET_STAT_BVALID 0x00000002
+#define BM_ANADIG_USB2_VBUS_DET_STAT_SESSEND 0x00000001
+
+#define HW_ANADIG_USB2_CHRG_DET_STAT	(0x00000230)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_SET	(0x00000234)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_CLR	(0x00000238)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_TOG	(0x0000023c)
+
+#define BP_ANADIG_USB2_CHRG_DET_STAT_RSVD0      4
+#define BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB2_CHRG_DET_STAT_RSVD0(v) \
+	(((v) << 4) & BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DET_STAT_DP_STATE 0x00000008
+#define BM_ANADIG_USB2_CHRG_DET_STAT_DM_STATE 0x00000004
+#define BM_ANADIG_USB2_CHRG_DET_STAT_CHRG_DETECTED 0x00000002
+#define BM_ANADIG_USB2_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+
+#define HW_ANADIG_USB2_LOOPBACK	(0x00000240)
+#define HW_ANADIG_USB2_LOOPBACK_SET	(0x00000244)
+#define HW_ANADIG_USB2_LOOPBACK_CLR	(0x00000248)
+#define HW_ANADIG_USB2_LOOPBACK_TOG	(0x0000024c)
+
+#define BP_ANADIG_USB2_LOOPBACK_RSVD0      9
+#define BM_ANADIG_USB2_LOOPBACK_RSVD0 0xFFFFFE00
+#define BF_ANADIG_USB2_LOOPBACK_RSVD0(v) \
+	(((v) << 9) & BM_ANADIG_USB2_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST1 0x00000100
+#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST0 0x00000080
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HIZ 0x00000040
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN 0x00000020
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_LS_MODE 0x00000010
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HS_MODE 0x00000008
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 0x00000004
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST0 0x00000002
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_TESTSTART 0x00000001
+
+#define HW_ANADIG_USB2_MISC	(0x00000250)
+#define HW_ANADIG_USB2_MISC_SET	(0x00000254)
+#define HW_ANADIG_USB2_MISC_CLR	(0x00000258)
+#define HW_ANADIG_USB2_MISC_TOG	(0x0000025c)
+
+#define BM_ANADIG_USB2_MISC_RSVD1 0x80000000
+#define BM_ANADIG_USB2_MISC_EN_CLK_UTMI 0x40000000
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS 0x20000000
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS 0x10000000
+#define BM_ANADIG_USB2_MISC_RX_RXD_FS 0x08000000
+#define BM_ANADIG_USB2_MISC_RX_SQUELCH 0x04000000
+#define BM_ANADIG_USB2_MISC_RX_DISCON_DET 0x02000000
+#define BM_ANADIG_USB2_MISC_RX_HS_DATA 0x01000000
+#define BP_ANADIG_USB2_MISC_RSVD0      2
+#define BM_ANADIG_USB2_MISC_RSVD0 0x00FFFFFC
+#define BF_ANADIG_USB2_MISC_RSVD0(v)  \
+	(((v) << 2) & BM_ANADIG_USB2_MISC_RSVD0)
+#define BM_ANADIG_USB2_MISC_EN_DEGLITCH 0x00000002
+#define BM_ANADIG_USB2_MISC_HS_USE_EXTERNAL_R 0x00000001
+
+#define HW_ANADIG_DIGPROG	(0x00000260)
+
+#define BP_ANADIG_DIGPROG_RSVD      24
+#define BM_ANADIG_DIGPROG_RSVD 0xFF000000
+#define BF_ANADIG_DIGPROG_RSVD(v) \
+	(((v) << 24) & BM_ANADIG_DIGPROG_RSVD)
+#define BP_ANADIG_DIGPROG_MAJOR      8
+#define BM_ANADIG_DIGPROG_MAJOR 0x00FFFF00
+#define BF_ANADIG_DIGPROG_MAJOR(v)  \
+	(((v) << 8) & BM_ANADIG_DIGPROG_MAJOR)
+#define BP_ANADIG_DIGPROG_MINOR      0
+#define BM_ANADIG_DIGPROG_MINOR 0x000000FF
+#define BF_ANADIG_DIGPROG_MINOR(v)  \
+	(((v) << 0) & BM_ANADIG_DIGPROG_MINOR)
+
 #endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 2631beb..62b72a5 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -587,6 +587,12 @@ struct fuse_bank0_regs {
 	u32	rsvd7[4];
 };
 
+struct fuse_bank1_regs {
+	u32     mem[0x18];
+	u32	ana1;
+	u32     ana2;
+};
+
 #ifdef CONFIG_MX6SX
 struct fuse_bank4_regs {
 	u32 sjc_resp_low;
@@ -805,5 +811,6 @@ struct pwm_regs {
 	u32	pr;
 	u32	cnr;
 };
+extern void check_cpu_temperature(void);
 #endif /* __ASSEMBLER__*/
 #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
-- 
1.7.9.5



More information about the U-Boot mailing list