[U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data

[Stefano Babic]

On 24/11/2014 15:24, Fabio Estevam wrote:
> Printing the calibration data on every boot does not provide really useful
> information:
> 
> U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51)                      
>                                                                                 
> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz                                       
> CPU:   Thermal calibration data: 0x5d85067d                                     
> CPU:   Temperature 33 C                                                         
> Reset cause: POR                                                                
> Board: MX6-SabreSD
> 
> Do not display the calibration data in order to have a cleaner boot log.               
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  drivers/thermal/imx_thermal.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 1161585..0bd9cfd 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev)
>  	if (fuse == 0 || fuse == ~0) {
>  		printf("CPU:   Thermal invalid data, fuse: 0x%x\n", fuse);
>  		return -EPERM;
> -	} else {
> -		printf("CPU:   Thermal calibration data: 0x%x\n", fuse);
>  	}
>  
>  	*priv = fuse;
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================