[U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)

[Stefano Babic]

On 27/11/2014 13:46, Stefan Roese wrote:
> As checkpatch complaines about these camel-case defines, lets change
> them to only use upper-case characters.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Acked-by: Heiko Schocher <hs at denx.de> 
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Jon Nettleton <jon.nettleton at gmail.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> v2:
> - Rebased on current master
> 
>  arch/arm/cpu/armv7/mx6/clock.c              | 2 +-
>  arch/arm/include/asm/arch-mx6/clock.h       | 8 ++++----
>  board/aristainetos/aristainetos.c           | 2 +-
>  board/freescale/mx6slevk/mx6slevk.c         | 2 +-
>  board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
>  board/solidrun/hummingboard/hummingboard.c  | 2 +-
>  6 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index ab7ac3d..93a02ad 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -443,7 +443,7 @@ int enable_fec_anatop_clock(enum enet_freq freq)
>  	struct anatop_regs __iomem *anatop =
>  		(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
>  
> -	if (freq < ENET_25MHz || freq > ENET_125MHz)
> +	if (freq < ENET_25MHZ || freq > ENET_125MHZ)
>  		return -EINVAL;
>  
>  	reg = readl(&anatop->pll_enet);
> diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
> index 323805c..226a4cd 100644
> --- a/arch/arm/include/asm/arch-mx6/clock.h
> +++ b/arch/arm/include/asm/arch-mx6/clock.h
> @@ -43,10 +43,10 @@ enum mxc_clock {
>  };
>  
>  enum enet_freq {
> -	ENET_25MHz,
> -	ENET_50MHz,
> -	ENET_100MHz,
> -	ENET_125MHz,
> +	ENET_25MHZ,
> +	ENET_50MHZ,
> +	ENET_100MHZ,
> +	ENET_125MHZ,
>  };
>  
>  u32 imx_get_uartclk(void);
> diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
> index 06922c0..67ac260 100644
> --- a/board/aristainetos/aristainetos.c
> +++ b/board/aristainetos/aristainetos.c
> @@ -301,7 +301,7 @@ int board_eth_init(bd_t *bis)
>  	/* clear gpr1[14], gpr1[18:17] to select anatop clock */
>  	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
>  
> -	ret = enable_fec_anatop_clock(ENET_50MHz);
> +	ret = enable_fec_anatop_clock(ENET_50MHZ);
>  	if (ret)
>  		return ret;
>  
> diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
> index 8111edf..cac6d73 100644
> --- a/board/freescale/mx6slevk/mx6slevk.c
> +++ b/board/freescale/mx6slevk/mx6slevk.c
> @@ -234,7 +234,7 @@ static int setup_fec(void)
>  	/* clear gpr1[14], gpr1[18:17] to select anatop clock */
>  	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
>  
> -	return enable_fec_anatop_clock(ENET_50MHz);
> +	return enable_fec_anatop_clock(ENET_50MHZ);
>  }
>  #endif
>  
> diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> index 7aee074..8b959b9 100644
> --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> @@ -168,7 +168,7 @@ static int setup_fec(void)
>  	reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
>  	writel(reg, &anatop->pll_enet);
>  
> -	return enable_fec_anatop_clock(ENET_125MHz);
> +	return enable_fec_anatop_clock(ENET_125MHZ);
>  }
>  
>  int board_eth_init(bd_t *bis)
> diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c
> index 6d204b3..52c384b 100644
> --- a/board/solidrun/hummingboard/hummingboard.c
> +++ b/board/solidrun/hummingboard/hummingboard.c
> @@ -146,7 +146,7 @@ int board_eth_init(bd_t *bis)
>  {
>  	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
>  
> -	int ret = enable_fec_anatop_clock(ENET_25MHz);
> +	int ret = enable_fec_anatop_clock(ENET_25MHZ);
>  	if (ret)
>  		return ret;
>  
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================