[U-Boot] [PATCH 2/2] i2c: Correct spelling error

[Mark Tomlinson]

"diconnect" and "disconnet" should both be "disconnect".

Signed-off-by: Mark Tomlinson <mark.tomlinson at alliedtelesis.co.nz>
---
 drivers/i2c/i2c_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
index 4539667..41cc3b8 100644
--- a/drivers/i2c/i2c_core.c
+++ b/drivers/i2c/i2c_core.c
@@ -174,7 +174,7 @@ static int i2c_mux_set_all(void)
 	return 0;
 }
 
-static int i2c_mux_disconnet_all(void)
+static int i2c_mux_disconnect_all(void)
 {
 	struct	i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
 	int	i;
@@ -197,7 +197,7 @@ static int i2c_mux_disconnet_all(void)
 
 			ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1);
 			if (ret != 0) {
-				printf("i2c: mux diconnect error\n");
+				printf("i2c: mux disconnect error\n");
 				return ret;
 			}
 		} while (i > 0);
@@ -293,7 +293,7 @@ int i2c_set_bus_num(unsigned int bus)
 	}
 
 #ifndef CONFIG_SYS_I2C_DIRECT_BUS
-	i2c_mux_disconnet_all();
+	i2c_mux_disconnect_all();
 #endif
 
 	gd->cur_i2c_bus = bus;
-- 
1.9.1