[U-Boot] [PATCH v4 2/9] spl: Use u-boot.img instead of u-boot.bin

Alison Wang b18965 at freescale.com
Wed Dec 3 08:00:42 CET 2014


In SD boot, the magic number of u-boot image will be checked.
For LS102xA, u-boot.bin doesn't have the magic number. So use
u-boot.img which includes the magic number instead of u-boot.bin
when producing u-boot-with-spl-pbl.bin.

Signed-off-by: Alison Wang <alison.wang at freescale.com>
---
Change log:
 v4: No change.
 v3: No change.
 v2: No change.

 Makefile | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index b1a8acd..0d83fbf 100644
--- a/Makefile
+++ b/Makefile
@@ -1022,10 +1022,16 @@ MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
 			  --gap-fill=0xff
 
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
 	$(call if_changed,pad_cat)
 
 # PPC4xx needs the SPL at the end of the image, since the reset vector
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list