[U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL

[Huan Wang]

Hi, Yamada,

> On Wed, 3 Dec 2014 15:00:45 +0800
> Alison Wang <b18965 at freescale.com> wrote:
> 
> > Add SUPPORT_SPL feature for SD and NAND boot on LS1021AQDS and
> > LS1021ATWR.
> >
> > Signed-off-by: Alison Wang <alison.wang at freescale.com>
> > ---
> > Change log:
> >  v4: New file.
> >
> >  arch/arm/Kconfig | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index
> > 0982117..1f00e93 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -730,10 +730,12 @@ config TARGET_LS2085A_SIMU  config
> > TARGET_LS1021AQDS
> >  	bool "Support ls1021aqds_nor"
> >  	select CPU_V7
> > +	select SUPPORT_SPL
> >
> >  config TARGET_LS1021ATWR
> >  	bool "Support ls1021atwr_nor"
> >  	select CPU_V7
> > +	select SUPPORT_SPL
> >
> >  config TARGET_BALLOON3
> >  	bool "Support balloon3"
> > --
> 
> While you are here, could you fix the prompts too?
> 
> "ls1021aqds_nor" implies NOR boot, but you are adding SD/NAND boot,
> right?
>
[Alison Wang] Yes, I add SUPPORT_SPL is for SD/NAND boot. "ls1021aqds_nor"
is not clear, I could change it to "ls1021aqds".

Best Regards,
Alison Wang