[U-Boot] [PATCH 3/6] ARM: atmel: sama5d4ek: add option for usb ethernet gadget

[Bo Shen]

Add the option for USB Ethernet gadget based on atmel usb
device.

Signed-off-by: Bo Shen <voice.shen at atmel.com>
---

 board/atmel/sama5d4ek/sama5d4ek.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index f8394f5..e014e0a 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -10,6 +10,7 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_usba_udc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
@@ -294,6 +295,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_USB
 	sama5d4ek_usb_hw_init();
 #endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
 
 	return 0;
 }
@@ -313,5 +317,12 @@ int board_eth_init(bd_t *bis)
 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
 #endif
 
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
 	return rc;
 }
-- 
2.1.0.24.g4109c28