[U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board
Przemyslaw Marczak
p.marczak at samsung.com
Wed Dec 3 18:08:33 CET 2014
Hello,
On 12/03/2014 05:28 PM, Simon Glass wrote:
> Hi,
>
> On 3 December 2014 at 05:46, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> Hello all,
>>
>>
>> On 12/02/2014 08:07 AM, Hyungwon Hwang wrote:
>>>
>>> This is v10 of the patchset adding support Odroud XU3 board.
>>>
>>> link to the previous version:
>>> v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html
>>> v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html
>>> v4: https://patchwork.ozlabs.org/patch/407411/
>>> v5: https://patchwork.ozlabs.org/patch/407941/
>>> v6: https://patchwork.ozlabs.org/patch/408647/
>>> v7: https://patchwork.ozlabs.org/patch/410204/
>>> v8: https://patchwork.ozlabs.org/patch/410709/
>>> v9: https://patchwork.ozlabs.org/patch/415514/
>>>
>>> The patchset by Akshay Saraswat is already merged into u-boot-samsung.
>>> Please ignore the instruction about the additional patchset in v8.
>>>
>>> How to test this patch:
>>> 1. git clone http://git.denx.de/u-boot-samsung.git
>>> 2. Apply this patchset
>>> 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config
>>> 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8
>>> 5. Now you can use u-boot-dtb.bin for your downloading
>>>
>>> WARNING: (update in V10)
>>> It was impossible to make the u-boot image smaller than 335872 bytes, and
>>> also
>>> I did not want to waste my time to make it fit for that restriction,
>>> because
>>> the discussion about this issue is in progress in malining list. I used
>>> BL2 by
>>> Suriyan Ramasami <suriyan.r at gmail.com> which the restriction is removed
>>> for
>>> testing. If you need the BL2 for testing, please contact me or Suriyan.
>>>
>>> Note: If you use micro SD card for your test you have to apply the below
>>> patch additionally. This patch is needed, because micro sd card is
>>> recognized as MMC1 instead of MMC0. Additional work is needed to make it
>>> work regardless of device id.
>>>
>>> Thanks for Sjoerd Simons. Not only did he comment my patchset, but he also
>>> made
>>> real patch for me. I squashed some part of that patchset, and included the
>>> remainings into my patchset.
>>>
>>> diff --git a/include/configs/exynos5-common.h
>>> b/include/configs/exynos5-common.h
>>> index ba591e7..437eaae 100644
>>> --- a/include/configs/exynos5-common.h
>>> +++ b/include/configs/exynos5-common.h
>>> @@ -109,7 +109,7 @@
>>>
>>> #define CONFIG_SYS_MONITOR_BASE 0x00000000
>>>
>>> -#define CONFIG_SYS_MMC_ENV_DEV 0
>>> +#define CONFIG_SYS_MMC_ENV_DEV 1
>>>
>>> #define CONFIG_SECURE_BL1_ONLY
>>>
>>> Changes for v2:
>>> - Add a patch to add new common setup header file for Odroid X2/U3
>>> and Odroid XU3
>>>
>>> Changes for v3:
>>> - Remove the patch which adds new common setup header file from v2
>>> - Remove the wrong patch to fix GPIO information of Exynos 5800
>>> - Remove unnecessary node from DT file
>>> - Remove unnecessary features from config file
>>> - Fix some trivial typos in comments
>>>
>>> Changes for v4:
>>> - Add MMC FIFO buffer's configuration to DT file
>>> - Make CONFIG_OF_CONTROL be set by the target information
>>> - Add basic document to doc/README.odroid-xu3
>>> - Add CONFIG_CMD_EXT4 to config file
>>> - Add environment size and offset to config file
>>> - Add extra default environment to make bootable without modification
>>> - Remove unnecessary features from config file
>>>
>>> Changes for v5:
>>> - Add the specific build instruction
>>> - Update the information of patchset by Akshay Saraswat
>>> - Convert /include/ to #include in DT file
>>>
>>> Changes for v6:
>>> - Separate out the documentation to new commit
>>> - Remove unnecessary header file inclusuib from the board-specific setup
>>> file
>>> - Make the function board_clock_init be declared, only when
>>> CONFIG_BOARD_EARLY_INIT_F is defined
>>>
>>> Changes for v7:
>>> - Fix several errata in the documentation
>>> - Remove OF_CONTROL dependency from !SPL_BUILD
>>>
>>> Changes for v8:
>>> - Remove unnecessary properties in DT mmc node
>>>
>>> Changes for v9:
>>> - Remove the first patch which change GPIO entries order. It became
>>> useless,
>>> after DT support is added
>>> - Remove useless variables in the default environment
>>> - Add the new contents to the documentation of Odroid X2/U2, instead of
>>> making new document for Odorid XU3
>>> - Remove the detailed information in the header file, and leave the
>>> reference to the documentation
>>>
>>> Changes for v10:
>>> - Move the non common configs in Exynos5420 config file to each board file
>>> - Remove the config unsets which are added to make the result image small
>>> This is needless now, because the image is not small enough even though
>>> these
>>> unsets are added.
>>> - Remove redundant DT node and properties
>>> - Remove the odroid-xu3 board file and make odroid-xu3 a variant of
>>> smdk5420
>>> - Fix some errata in documentation
>>> - Include the patch by Sjoerd Simons as 4th patch
>>>
>>> Hyungwon Hwang (3):
>>> config: exynos5420: move non common configs to specific board files
>>> Odroid-XU3: Add support for Odroid-XU3
>>> Odroid-XU3: Add documentation for Odroid-XU3
>>>
>>> Sjoerd Simons (1):
>>> Odroid-XU3: Add entry for DTS EHCI GPIO
>>>
>>> arch/arm/cpu/armv7/exynos/Kconfig | 4 +++
>>> arch/arm/dts/Makefile | 3 +-
>>> arch/arm/dts/exynos5422-odroidxu3.dts | 49
>>> +++++++++++++++++++++++++++++++
>>> board/samsung/smdk5420/Kconfig | 13 +++++++++
>>> configs/odroid-xu3_defconfig | 4 +++
>>> doc/README.odroid | 46 ++++++++++++++++++-----------
>>> include/configs/exynos5420-common.h | 18 ------------
>>> include/configs/odroid_xu3.h | 54
>>> +++++++++++++++++++++++++++++++++++
>>> include/configs/peach-pi.h | 6 ++++
>>> include/configs/peach-pit.h | 6 ++++
>>> include/configs/smdk5420.h | 11 +++++++
>>> 11 files changed, 179 insertions(+), 35 deletions(-)
>>> create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts
>>> create mode 100644 configs/odroid-xu3_defconfig
>>> create mode 100644 include/configs/odroid_xu3.h
>>>
>>
>> I talked to man from the hardkernel, and he said that there is no
>> restrictions about adding BL1/BL2/TZSW as a binary blob to the Mainline
>> U-Boot. So I think, in this case it should be provided also with those
>> patches. Then we have a complete board setup.
>>
>> To Hyungwon,
>> There is a size limit for each patch (100KiB), so if you would like to add
>> such binary blob, you should add it using this site:
>> http://www.denx.de/wiki/attach/U-Boot/TooBigPatches
>> after a registration.
>
> If the intent is to upload a hexdump of a few of the files, that does
> sound like a convenient option. Very unfortunate though. At least for
> the trustzone file it is mostly zeroes, and seems to consist of 3
> separate very small images. So perhaps we should have a tool that
> pieces them together?
>
> Regards,
> Simon
>
Yes, this makes sense.
And I think that we can modify the layout to have the order:
BL1|BL2|TZSW|U-BOOT,
then we can make one or two binnaries: signed blob and U-Boot.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list