[U-Boot] [PATCH 22/25] x86: crownbay: Add SPI flash support

[Simon Glass]

Hi Bin,

On 4 December 2014 at 08:03, Bin Meng <bmeng.cn at gmail.com> wrote:
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>  arch/x86/cpu/queensbay/tnc.c | 26 +++++++++++++++++++++++++-
>  include/configs/crownbay.h   |  2 ++
>  2 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
> index c0d19aa..eea70c0 100644
> --- a/arch/x86/cpu/queensbay/tnc.c
> +++ b/arch/x86/cpu/queensbay/tnc.c
> @@ -6,17 +6,41 @@
>
>  #include <common.h>
>  #include <asm/io.h>
> +#include <asm/pci.h>
>  #include <asm/post.h>
>  #include <asm/arch/fsp/fsp_support.h>
>
> +/* PCI Configuration Space (D31:F0): LPC */
> +#define PCH_LPC_DEV    PCI_BDF(0, 0x1f, 0)

Can this go in a header file somwhere?

> +
> +static void unprotect_spi_flash(void)
> +{
> +       u32 bc;
> +
> +       bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
> +       bc |= 0x1;      /* unprotect the flash */
> +       pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
> +}
> +
>  int arch_cpu_init(void)
>  {
> +       struct pci_controller *hose;
> +       int ret;
> +
>         post_code(POST_CPU_INIT);
>  #ifdef CONFIG_SYS_X86_TSC_TIMER
>         timer_set_base(rdtsc());
>  #endif
>
> -       return x86_cpu_init_f();
> +       x86_cpu_init_f();

Need to check error return.

> +
> +       ret = pci_early_init_hose(&hose);
> +       if (ret)
> +               return ret;
> +
> +       unprotect_spi_flash();
> +
> +       return 0;
>  }
>
>  int print_cpuinfo(void)
> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
> index 2314e62..a051b11 100644
> --- a/include/configs/crownbay.h
> +++ b/include/configs/crownbay.h
> @@ -45,6 +45,8 @@
>  #define CONFIG_SCSI_DEV_LIST            \
>         {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
>
> +#define CONFIG_SPI_FLASH_SST
> +
>  /* Video is not supported */
>  #undef CONFIG_VIDEO
>  #undef CONFIG_CFB_CONSOLE
> --
> 1.8.2.1
>

Regards,
Simon