[U-Boot] [PATCH 2/9] ARM: UniPhier: use boot_is_swapped() macro for readability
Masahiro Yamada
yamada.m at jp.panasonic.com
Fri Dec 5 16:03:19 CET 2014
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
index f113db5..3c82a1a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
@@ -22,16 +22,7 @@ void sbc_init(void)
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
- if (readl(SBBASE0) & 0x1) {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x3effffff: memory bank (31MB)
- * 0x03f00000-0x3fffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- } else {
+ if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
@@ -40,6 +31,15 @@ void sbc_init(void)
* 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x00000000-0x01ffffff: mask ROM
+ * 0x02000000-0x3effffff: memory bank (31MB)
+ * 0x03f00000-0x3fffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
#if !defined(CONFIG_SPL_BUILD)
--
1.9.1
More information about the U-Boot
mailing list