[U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support

[York Sun]

On 11/17/2014 05:12 PM, Xie Xiaobo wrote:
> The SD supply Voltage was 3.3V on T4240RDB, so enabled 3.3V support for eSDHC.
> 
> Signed-off-by: Xie Xiaobo <X.Xie at freescale.com>
> Signed-off-by: Wujie Qiu <B49553 at freescale.com>
> ---

Applied to u-boot-mpc85xx, awaiting upstream.

York