[U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board
York Sun
yorksun at freescale.com
Fri Dec 5 19:10:49 CET 2014
On 12/02/2014 11:00 PM, Alison Wang wrote:
> This patch adds NAND boot support for LS1021AQDS board. SPL
> framework is used. PBL initialize the internal RAM and copy
> SPL to it, then SPL initialize DDR using SPD and copy u-boot
> from NAND flash to DDR, finally SPL transfer control to u-boot.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> ---
> Change log:
> v4: Use some defines instead of the magic numbers.
> v3: New file.
>
> arch/arm/include/asm/arch-ls102xa/config.h | 1 +
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021aqds/ls1021aqds.c | 16 ++++++
> board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++
> configs/ls1021aqds_nand_defconfig | 4 ++
> drivers/mtd/nand/fsl_ifc_spl.c | 8 +++
> include/configs/ls1021aqds.h | 68 +++++++++++++++++++++++
> 8 files changed, 107 insertions(+)
> create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
> create mode 100644 configs/ls1021aqds_nand_defconfig
>
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> index a500b5b..da7537c 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -13,6 +13,7 @@
> #define OCRAM_SIZE 0x00020000
>
> #define CONFIG_SYS_IMMR 0x01000000
> arch/arm/include/asm/arch-ls102xa/config.h | 1 +
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 ++
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021aqds/ls1021aqds.c | 16 +++++
> board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++
> configs/ls1021aqds_nand_defconfig | 4 ++
> drivers/mtd/nand/fsl_ifc_spl.c | 10 ++++
> include/configs/ls1021aqds.h | 72 +++++++++++++++++++++++
> 8 files changed, 116 insertions(+)
> create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
> create mode 100644 configs/ls1021aqds_nand_defconfig
The above lines are not supposed to be here.
>
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> index ba86eea..8318c91 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -13,6 +13,7 @@
> #define OCRAM_SIZE 0x00020000
>
> #define CONFIG_SYS_IMMR 0x01000000
> +#define CONFIG_SYS_DCSRBAR 0x20200000
>
> #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
> #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
Alison,
This patch is corrupted. Please re-generate (this patch only).
York
More information about the U-Boot
mailing list