[U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"

[Felipe Balbi]

On Sat, Dec 06, 2014 at 10:24:33AM -0800, Steve Rae wrote:
> enable this clock with the following:
>   clk_usb_otg_enable((void *)HSOTG_BASE_ADDR)
> 
> Signed-off-by: Steve Rae <srae at broadcom.com>

Reviewed-by: Felipe Balbi <balbi at ti.com>

> ---
> 
> Changes in v2:
> removed unrelated changes as per Felipe Balbi <balbi at ti.com>
> 
>  arch/arm/cpu/armv7/bcm281xx/Makefile        |  1 +
>  arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c  | 16 +++++++++++++++
>  arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c   | 32 +++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/kona-common/clk-stubs.c  |  5 +++++
>  arch/arm/include/asm/arch-bcm281xx/sysmap.h |  2 ++
>  arch/arm/include/asm/kona-common/clk.h      |  1 +
>  6 files changed, 57 insertions(+)
>  create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
> 
> diff --git a/arch/arm/cpu/armv7/bcm281xx/Makefile b/arch/arm/cpu/armv7/bcm281xx/Makefile
> index bd867a2..f24aeb3 100644
> --- a/arch/arm/cpu/armv7/bcm281xx/Makefile
> +++ b/arch/arm/cpu/armv7/bcm281xx/Makefile
> @@ -10,3 +10,4 @@ obj-y	+= clk-bcm281xx.o
>  obj-y	+= clk-sdio.o
>  obj-y	+= clk-bsc.o
>  obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
> +obj-y	+= clk-usb-otg.o
> diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
> index d16b99f..7e25255 100644
> --- a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
> +++ b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
> @@ -209,6 +209,10 @@ static struct peri_clk_data sdio4_sleep_data = {
>  	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
>  };
>  
> +static struct bus_clk_data usb_otg_ahb_data = {
> +	.gate		= HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
> +};
> +
>  static struct bus_clk_data sdio1_ahb_data = {
>  	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
>  };
> @@ -331,6 +335,17 @@ static struct ccu_clock esub_ccu_clk = {
>   */
>  
>  /* KPM bus clocks */
> +static struct bus_clock usb_otg_ahb_clk = {
> +	.clk = {
> +		.name = "usb_otg_ahb_clk",
> +		.parent = &kpm_ccu_clk.clk,
> +		.ops = &bus_clk_ops,
> +		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
> +	},
> +	.freq_tbl = master_ahb_freq_tbl,
> +	.data = &usb_otg_ahb_data,
> +};
> +
>  static struct bus_clock sdio1_ahb_clk = {
>  	.clk = {
>  		.name = "sdio1_ahb_clk",
> @@ -541,6 +556,7 @@ struct clk_lookup arch_clk_tbl[] = {
>  	CLK_LK(bsc2),
>  	CLK_LK(bsc3),
>  	/* Bus clocks */
> +	CLK_LK(usb_otg_ahb),
>  	CLK_LK(sdio1_ahb),
>  	CLK_LK(sdio2_ahb),
>  	CLK_LK(sdio3_ahb),
> diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c b/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
> new file mode 100644
> index 0000000..b7efd8e
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright 2014 Broadcom Corporation.
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/arch/sysmap.h>
> +#include "clk-core.h"
> +
> +/* Enable appropriate clocks for the USB OTG port */
> +int clk_usb_otg_enable(void *base)
> +{
> +	int ret;
> +	char *ahbstr;
> +
> +	switch ((u32) base) {
> +	case HSOTG_BASE_ADDR:
> +		ahbstr = "usb_otg_ahb_clk";
> +		break;
> +	default:
> +		printf("%s: base 0x%p not found\n", __func__, base);
> +		return -EINVAL;
> +	}
> +
> +	ret = clk_get_and_enable(ahbstr);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> diff --git a/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
> index 338e0e4..fa10802 100644
> --- a/arch/arm/cpu/armv7/kona-common/clk-stubs.c
> +++ b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
> @@ -19,3 +19,8 @@ int __weak clk_bsc_enable(void *base, u32 rate, u32 *actual_ratep)
>  {
>  	return 0;
>  }
> +
> +int __weak clk_usb_otg_enable(void *base)
> +{
> +	return 0;
> +}
> diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> index 350e7f6..93ebf34 100644
> --- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> +++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> @@ -13,6 +13,8 @@
>  #define ESUB_CLK_BASE_ADDR	0x38000000
>  #define ESW_CONTRL_BASE_ADDR	0x38200000
>  #define GPIO2_BASE_ADDR		0x35003000
> +#define HSOTG_BASE_ADDR		0x3f120000
> +#define HSOTG_CTRL_BASE_ADDR	0x3f130000
>  #define KONA_MST_CLK_BASE_ADDR	0x3f001000
>  #define KONA_SLV_CLK_BASE_ADDR	0x3e011000
>  #define PMU_BSC_BASE_ADDR	0x3500d000
> diff --git a/arch/arm/include/asm/kona-common/clk.h b/arch/arm/include/asm/kona-common/clk.h
> index 2c7e829..a5e2fd9 100644
> --- a/arch/arm/include/asm/kona-common/clk.h
> +++ b/arch/arm/include/asm/kona-common/clk.h
> @@ -25,5 +25,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
>  struct clk *clk_get_parent(struct clk *clk);
>  int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
>  int clk_bsc_enable(void *base);
> +int clk_usb_otg_enable(void *base);
>  
>  #endif
> -- 
> 1.8.5
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141206/d90f28c9/attachment.pgp>