[U-Boot] [PATCH v1] mx51_na04: add support for the Hercules eCAFE laptop
Emil Renner Berthing
u-boot at esmil.dk
Sun Dec 7 18:59:22 CET 2014
Signed-off-by: Emil Renner Berthing <u-boot at esmil.dk>
---
arch/arm/Kconfig | 5 +
arch/arm/include/asm/arch-mx5/iomux-mx51.h | 19 ++
arch/arm/include/asm/mach-types.h | 13 +
board/hercules/mx51_na04/Kconfig | 15 +
board/hercules/mx51_na04/MAINTAINERS | 6 +
board/hercules/mx51_na04/Makefile | 10 +
board/hercules/mx51_na04/mx51_na04.c | 469 +++++++++++++++++++++++++++++
configs/mx51_na04_defconfig | 3 +
include/configs/mx51_na04.h | 246 +++++++++++++++
9 files changed, 786 insertions(+)
create mode 100644 board/hercules/mx51_na04/Kconfig
create mode 100644 board/hercules/mx51_na04/MAINTAINERS
create mode 100644 board/hercules/mx51_na04/Makefile
create mode 100644 board/hercules/mx51_na04/mx51_na04.c
create mode 100644 configs/mx51_na04_defconfig
create mode 100644 include/configs/mx51_na04.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0982117..f8c4429 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -581,6 +581,10 @@ config TARGET_MX51_EFIKAMX
bool "Support mx51_efikamx"
select CPU_V7
+config TARGET_MX51_NA04
+ bool "Support the Hercules eCAFE Slim/EX HD laptops"
+ select CPU_V7
+
config TARGET_VISION2
bool "Support vision2"
select CPU_V7
@@ -911,6 +915,7 @@ source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/vf610twr/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/genesi/mx51_efikamx/Kconfig"
+source "board/hercules/mx51_na04/Kconfig"
source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hale/tt01/Kconfig"
diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
index 70aaa37..91dde62 100644
--- a/arch/arm/include/asm/arch-mx5/iomux-mx51.h
+++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
@@ -71,6 +71,7 @@ enum {
MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
MX51_PAD_EIM_A26__GPIO2_20 = IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+ MX51_PAD_EIM_A27__GPIO2_21 = IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
MX51_PAD_EIM_EB2__FEC_MDIO = IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, PAD_CTL_PUS_22K_UP | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_HYS),
MX51_PAD_EIM_EB3__FEC_RDATA1 = IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL),
@@ -105,6 +106,7 @@ enum {
MX51_PAD_NANDF_CLE__PATA_RESET_B = IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_RB0__SD3_DATA3 = IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_RB2__FEC_COL = IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2),
MX51_PAD_NANDF_RB2__GPIO3_10 = IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
@@ -122,23 +124,32 @@ enum {
MX51_PAD_NANDF_CS6__FEC_TDATA3 = IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_CS7__FEC_TX_EN = IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5),
+ MX51_PAD_NANDF_CS7__SD3_CLK = IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK = IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4),
+ MX51_PAD_NANDF_RDY_INT__SD3_CMD = IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D15__GPIO3_25 = IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D15__SD3_DAT7 = IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D14__GPIO3_26 = IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D14__SD3_DAT6 = IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D13__GPIO3_27 = IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D13__SD3_DAT5 = IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D12__SD3_DAT4 = IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D11__FEC_RX_DV = IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D10__GPIO3_30 = IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D10__SD3_DATA2 = IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D9__FEC_RDATA0 = IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4),
MX51_PAD_NANDF_D9__GPIO3_31 = IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D9__SD3_DATA1 = IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D8__FEC_TDATA0 = IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5),
MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_NANDF_D8__SD3_DATA0 = IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, MX51_SDHCI_PAD_CTRL),
MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D5__PATA_DATA5 = IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL),
@@ -147,6 +158,7 @@ enum {
MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_CSI1_VSYNC__GPIO3_14 = IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_CSI2_D12__GPIO4_9 = IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_CSI2_D13__GPIO4_10 = IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
@@ -185,7 +197,13 @@ enum {
MX51_PAD_DI1_PIN3__DI1_PIN3 = IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_DI1_PIN2__DI1_PIN2 = IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL),
MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK = IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 = IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL),
+ MX51_PAD_DI_GP4__FEC_RDATA2 = IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL),
MX51_PAD_DI_GP4__DI2_PIN15 = IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL),
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN = IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, PAD_CTL_DSE_HIGH),
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK = IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_2),
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 = IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, NO_PAD_CTRL),
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 = IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, PAD_CTL_DSE_HIGH),
MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS),
MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
@@ -195,6 +213,7 @@ enum {
MX51_PAD_GPIO1_0__GPIO1_0 = IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+ MX51_PAD_GPIO1_1__GPIO1_1 = IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
MX51_PAD_SD2_CLK__SD2_CLK = IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS),
MX51_PAD_SD2_DATA0__SD2_DATA0 = IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index d4a447b..b8f0a6a 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -1103,6 +1103,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_THALES_ADC 3492
#define MACH_TYPE_UBISYS_P9D_EVP 3493
#define MACH_TYPE_ATDGP318 3494
+#define MACH_TYPE_MX51_NA04 3719
#define MACH_TYPE_OMAP5_SEVM 3777
#define MACH_TYPE_ARMADILLO_800EVA 3863
#define MACH_TYPE_KZM9G 4140
@@ -14201,6 +14202,18 @@ extern unsigned int __machine_arch_type;
# define machine_is_atdgp318() (0)
#endif
+#ifdef CONFIG_MACH_MX51_NA04
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MX51_NA04
+# endif
+# define machine_is_mx51_na04() (machine_arch_type == MACH_TYPE_MX51_NA04)
+#else
+# define machine_is_mx51_na04() (0)
+#endif
+
#ifdef CONFIG_MACH_OMAP5_SEVM
# ifdef machine_arch_type
# undef machine_arch_type
diff --git a/board/hercules/mx51_na04/Kconfig b/board/hercules/mx51_na04/Kconfig
new file mode 100644
index 0000000..8214328
--- /dev/null
+++ b/board/hercules/mx51_na04/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_MX51_NA04
+
+config SYS_BOARD
+ default "mx51_na04"
+
+config SYS_VENDOR
+ default "hercules"
+
+config SYS_SOC
+ default "mx5"
+
+config SYS_CONFIG_NAME
+ default "mx51_na04"
+
+endif
diff --git a/board/hercules/mx51_na04/MAINTAINERS b/board/hercules/mx51_na04/MAINTAINERS
new file mode 100644
index 0000000..7825f76
--- /dev/null
+++ b/board/hercules/mx51_na04/MAINTAINERS
@@ -0,0 +1,6 @@
+MX51_NA04 BOARD
+M: Emil Renner Berthing <u-boot at esmil.dk>
+S: Maintained
+F: board/hercules/mx51_na04/
+F: include/configs/mx51_na04.h
+F: configs/mx51_na04_defconfig
diff --git a/board/hercules/mx51_na04/Makefile b/board/hercules/mx51_na04/Makefile
new file mode 100644
index 0000000..d7d2aa7
--- /dev/null
+++ b/board/hercules/mx51_na04/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014, Emil Renner Berthing <u-boot at esmil.dk>
+# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
+#
+# (C) Copyright 2009 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += mx51_na04.o
diff --git a/board/hercules/mx51_na04/mx51_na04.c b/board/hercules/mx51_na04/mx51_na04.c
new file mode 100644
index 0000000..c573791
--- /dev/null
+++ b/board/hercules/mx51_na04/mx51_na04.c
@@ -0,0 +1,469 @@
+/*
+ * (C) Copyright 2014 Emil Renner Berthing <u-boot at esmil.dk>
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx51.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <power/pmic.h>
+#include <fsl_pmic.h>
+#include <mc13892.h>
+#include <usb/ehci-fsl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH)
+
+static const iomux_v3_cfg_t mx51_na04_pads[] = {
+ /* LCD */
+#define MX51_NA04_LCD_3V3 IMX_GPIO_NR(4, 9)
+ MX51_PAD_CSI2_D12__GPIO4_9,
+#define MX51_NA04_LVDS_POWER IMX_GPIO_NR(3, 3)
+ MX51_PAD_DI1_D0_CS__GPIO3_3,
+#define MX51_NA04_BACKLIGHT_CTL IMX_GPIO_NR(3, 4)
+ MX51_PAD_DI1_D1_CS__GPIO3_4,
+#define MX51_NA04_BACKLIGHT_PWM IMX_GPIO_NR(1, 2)
+ MX51_PAD_GPIO1_2__GPIO1_2,
+
+ /* UART 1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL),
+
+#ifdef CONFIG_FEC_MXC
+ /* FEC Ethernet */
+ NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_PUS_22K_UP | PAD_CTL_ODE |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ MX51_PAD_NANDF_CS3__FEC_MDC,
+ NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3,
+ MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_DI_GP4__FEC_RDATA2,
+ MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__FEC_RDATA1,
+ MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_DISP2_DAT14__FEC_RDATA0,
+ MX51_PAD_CTRL_2),
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0,
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN,
+ MX51_PAD_NANDF_CS2__FEC_TX_ER,
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL,
+ MX51_PAD_CTRL_4),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+ MX51_PAD_CTRL_4),
+ MX51_PAD_EIM_CS5__FEC_CRS,
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV,
+ MX51_PAD_CTRL_4),
+#define MX51_NA04_PHY_RESET IMX_GPIO_NR(2, 14)
+ NEW_PAD_CTRL(MX51_PAD_EIM_A20__GPIO2_14, PAD_CTL_PUE),
+#endif
+
+#ifdef CONFIG_MXC_SPI
+ /* SPI 1 */
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1,
+ MX51_GPIO_PAD_CTRL),
+ MX51_PAD_CSPI1_SS0__ECSPI1_SS0,
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CTRL_2),
+ NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
+#endif
+
+ /* USB Host 1 */
+ MX51_PAD_USBH1_CLK__USBH1_CLK,
+ MX51_PAD_USBH1_DIR__USBH1_DIR,
+ MX51_PAD_USBH1_STP__USBH1_STP,
+ MX51_PAD_USBH1_NXT__USBH1_NXT,
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+#define MX51_NA04_USB_PHY_RESET IMX_GPIO_NR(2, 5)
+ MX51_PAD_EIM_D21__GPIO2_5,
+#define MX51_NA04_USB_CLK_EN_B IMX_GPIO_NR(2, 27)
+ MX51_PAD_EIM_CS2__GPIO2_27,
+#define MX51_NA04_USBH1_HUB_RST IMX_GPIO_NR(1, 6)
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, 0),
+
+ /* Power Key */
+#define MX51_NA04_POWER_KEY IMX_GPIO_NR(2, 21)
+ NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, PAD_CTL_HYS),
+
+ /* Battery LED */
+#define MX51_NA04_BATTERY_LED IMX_GPIO_NR(3, 14)
+ NEW_PAD_CTRL(MX51_PAD_CSI1_VSYNC__GPIO3_14,
+ PAD_CTL_SRE_FAST),
+};
+
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ u32 rev = get_cpu_rev();
+ if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
+ rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
+ return rev;
+}
+
+static void init_lcd(void)
+{
+ /* Blank the LCD */
+ gpio_direction_output(MX51_NA04_LVDS_POWER, 0);
+ gpio_direction_output(MX51_NA04_BACKLIGHT_CTL, 0);
+ gpio_direction_output(MX51_NA04_BACKLIGHT_PWM, 0);
+
+ /* ..but keep the power on to avoid a nasty
+ * white flash when Linux takes over */
+ gpio_direction_output(MX51_NA04_LCD_3V3, 1);
+}
+
+static void reset_usb(void)
+{
+ /* Turn off USB_CLK_EN_B line */
+ gpio_direction_output(MX51_NA04_USB_CLK_EN_B, 1);
+
+ /* Assert USB hub reset */
+ gpio_direction_output(MX51_NA04_USBH1_HUB_RST, 0);
+
+ /* Assert USB phy reset */
+ gpio_direction_output(MX51_NA04_USB_PHY_RESET, 0);
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ /* De-assert USB phy reset */
+ gpio_set_value(MX51_NA04_USB_PHY_RESET, 1);
+
+ /* Drive USB_CLK_EN_B line low */
+ gpio_direction_output(MX51_NA04_USB_CLK_EN_B, 0);
+
+ mdelay(2);
+
+ /* De-assert USB usb reset */
+ gpio_set_value(MX51_NA04_USBH1_HUB_RST, 1);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MXC_SPI
+static void power_init(void)
+{
+ unsigned int val;
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+ struct pmic *p;
+ int ret;
+
+ ret = pmic_init(CONFIG_FSL_PMIC_BUS);
+ if (ret)
+ return;
+
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
+
+ /* Write needed to Power Gate 2 register */
+ pmic_reg_read(p, REG_POWER_MISC, &val);
+ val &= ~PWGT2SPIEN;
+ pmic_reg_write(p, REG_POWER_MISC, val);
+
+ /* Externally powered */
+ pmic_reg_read(p, REG_CHARGE, &val);
+ val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
+ pmic_reg_write(p, REG_CHARGE, val);
+
+ /* power up the system first */
+ pmic_reg_write(p, REG_POWER_MISC, PWUP);
+
+ /* Set core voltage to 1.1V */
+ pmic_reg_read(p, REG_SW_0, &val);
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
+ pmic_reg_write(p, REG_SW_0, val);
+
+ /* Setup VCC (SW2) to 1.25 */
+ pmic_reg_read(p, REG_SW_1, &val);
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
+ pmic_reg_write(p, REG_SW_1, val);
+
+ /* Setup 1V2_DIG1 (SW3) to 1.25 */
+ pmic_reg_read(p, REG_SW_2, &val);
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
+ pmic_reg_write(p, REG_SW_2, val);
+ udelay(50);
+
+ /* Raise the core frequency to 800MHz */
+ writel(0x0, &mxc_ccm->cacrr);
+
+ /* Set switchers in Auto in NORMAL mode & STANDBY mode */
+ /* Setup the switcher mode for SW1 & SW2*/
+ pmic_reg_read(p, REG_SW_4, &val);
+ val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
+ (SWMODE_MASK << SWMODE2_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
+ pmic_reg_write(p, REG_SW_4, val);
+
+ /* Setup the switcher mode for SW3 & SW4 */
+ pmic_reg_read(p, REG_SW_5, &val);
+ val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
+ (SWMODE_MASK << SWMODE4_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
+ pmic_reg_write(p, REG_SW_5, val);
+
+ /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
+ pmic_reg_read(p, REG_SETTING_0, &val);
+ val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
+ val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
+ pmic_reg_write(p, REG_SETTING_0, val);
+
+ /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
+ pmic_reg_read(p, REG_SETTING_1, &val);
+ val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
+ val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
+ pmic_reg_write(p, REG_SETTING_1, val);
+
+ /* Configure VGEN3 and VCAM regulators to use external PNP */
+ val = VGEN3CONFIG | VCAMCONFIG;
+ pmic_reg_write(p, REG_MODE_1, val);
+ udelay(200);
+
+ /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
+ VVIDEOEN | VAUDIOEN | VSDEN;
+ pmic_reg_write(p, REG_MODE_1, val);
+}
+#else
+static inline void power_init(void) {}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+static void reset_fec(void)
+{
+ gpio_direction_output(MX51_NA04_PHY_RESET, 0);
+ udelay(500);
+ gpio_set_value(MX51_NA04_PHY_RESET, 1);
+}
+#else
+static inline void reset_fec(void) {}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD,
+ PAD_CTL_DSE_MAX | PAD_CTL_HYS |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK,
+ PAD_CTL_DSE_MAX |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0,
+ PAD_CTL_DSE_MAX | PAD_CTL_HYS |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1,
+ PAD_CTL_DSE_MAX | PAD_CTL_HYS |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2,
+ PAD_CTL_DSE_MAX | PAD_CTL_HYS |
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3,
+ PAD_CTL_DSE_MAX | PAD_CTL_HYS |
+ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
+#define MX51_NA04_SDHC1_CD IMX_GPIO_NR(1, 0)
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0, PAD_CTL_HYS),
+#define MX51_NA04_SDHC1_WP IMX_GPIO_NR(1, 1)
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_1__GPIO1_1, PAD_CTL_HYS),
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_SD2_CMD__SD2_CMD,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_CLK__SD2_CLK,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA0__SD2_DATA0,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA1__SD2_DATA1,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA2__SD2_DATA2,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_SD2_DATA3__SD2_DATA3,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+#define MX51_NA04_SDHC2_CD IMX_GPIO_NR(1, 7)
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, PAD_CTL_HYS),
+#define MX51_NA04_SDHC2_WP IMX_GPIO_NR(1, 5)
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_5__GPIO1_5, PAD_CTL_HYS),
+ };
+
+ static const iomux_v3_cfg_t sd3_pads[] = {
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RDY_INT__SD3_CMD,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_CS7__SD3_CLK,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D8__SD3_DATA0,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D9__SD3_DATA1,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D10__SD3_DATA2,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_RB0__SD3_DATA3,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D12__SD3_DAT4,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D13__SD3_DAT5,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D14__SD3_DAT6,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D15__SD3_DAT7,
+ PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST),
+ };
+
+ static struct fsl_esdhc_cfg esdhc_cfg[] = {
+ {
+ .esdhc_base = MMC_SDHC1_BASE_ADDR,
+ .max_bus_width = 4,
+ },
+ {
+ .esdhc_base = MMC_SDHC2_BASE_ADDR,
+ .max_bus_width = 4,
+ },
+ {
+ .esdhc_base = MMC_SDHC3_BASE_ADDR,
+ .max_bus_width = 8,
+ },
+ };
+ u32 index;
+ int ret;
+
+ for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
+ gpio_direction_input(MX51_NA04_SDHC1_CD);
+ gpio_direction_input(MX51_NA04_SDHC1_WP);
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
+ gpio_direction_input(MX51_NA04_SDHC2_CD);
+ gpio_direction_input(MX51_NA04_SDHC2_WP);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(sd3_pads,
+ ARRAY_SIZE(sd3_pads));
+ esdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ default:
+ printf("Warning: you configured more ESDHC controllers(%d) than supported by the board(3)\n",
+ CONFIG_SYS_FSL_ESDHC_NUM);
+ return -EINVAL;
+ }
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
+
+ switch (cfg->esdhc_base) {
+ case MMC_SDHC1_BASE_ADDR:
+ return !gpio_get_value(MX51_NA04_SDHC1_CD);
+ case MMC_SDHC2_BASE_ADDR:
+ return !gpio_get_value(MX51_NA04_SDHC2_CD);
+ case MMC_SDHC3_BASE_ADDR:
+ return 1;
+ }
+
+ return 0;
+}
+
+int board_mmc_getwp(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
+
+ switch (cfg->esdhc_base) {
+ case MMC_SDHC1_BASE_ADDR:
+ return !!gpio_get_value(MX51_NA04_SDHC1_WP);
+ case MMC_SDHC2_BASE_ADDR:
+ return !!gpio_get_value(MX51_NA04_SDHC2_WP);
+ case MMC_SDHC3_BASE_ADDR:
+ return 0;
+ }
+
+ return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ imx_iomux_v3_setup_multiple_pads(mx51_na04_pads,
+ ARRAY_SIZE(mx51_na04_pads));
+ init_lcd();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ gpio_direction_input(MX51_NA04_POWER_KEY);
+ gpio_direction_output(MX51_NA04_BATTERY_LED, 0);
+ reset_usb();
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ power_init();
+ reset_fec();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Hercules eCAFE Slim/EX HD\n");
+
+ return 0;
+}
diff --git a/configs/mx51_na04_defconfig b/configs/mx51_na04_defconfig
new file mode 100644
index 0000000..eff61c2
--- /dev/null
+++ b/configs/mx51_na04_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx51evk/imximage.cfg"
+CONFIG_ARM=y
+CONFIG_TARGET_MX51_NA04=y
diff --git a/include/configs/mx51_na04.h b/include/configs/mx51_na04.h
new file mode 100644
index 0000000..70e7fc2
--- /dev/null
+++ b/include/configs/mx51_na04.h
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2014, Emil Renner Berthing <u-boot at esmil.dk>
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Hercules eCAFE Slim/EX HD laptops.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+
+#define CONFIG_MX51 /* in a mx51 */
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_TEXT_BASE 0x97800000
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_MACH_TYPE MACH_TYPE_MX51_NA04
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_BOARD_LATE_INIT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_FSL_IIM
+#define CONFIG_CMD_FUSE
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+#define CONFIG_MXC_GPIO
+
+/*
+ * SPI Configs
+ * */
+#define CONFIG_CMD_SPI
+
+#define CONFIG_MXC_SPI
+
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
+#define CONFIG_FSL_PMIC_BUS 0
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 2500000
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
+
+/*
+ * MMC Configs
+ */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
+#define CONFIG_SYS_FSL_ESDHC_NUM 3
+
+#define CONFIG_MMC
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Eth Configs
+ */
+#define CONFIG_MII
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1F
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_ARP_TIMEOUT 200UL
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
+#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
+#undef CONFIG_CMD_IMLS
+#ifndef CONFIG_FEC_MXC
+#undef CONFIG_CMD_NET
+#endif
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_INI
+
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_PREBOOT "if gpio i ${powerkey};then setenv bootdelay 1;fi"
+
+#define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr=0x91000000\0" \
+ "initrd_addr=0x93000000\0" \
+ "powerkey=53\0" \
+ "batteryled=78\0" \
+ "mmcdev=1\0" \
+ "mmcpart=1\0" \
+ "load=fatload\0" \
+ "section=default\0" \
+ "linux=zImage\0" \
+ "devicetree=imx51-na04.dtb\0" \
+ "options=console=ttymxc0,115200n8 console=tty1 root=/dev/mmcblk0p2 ro rootwait\0" \
+ "mmcinit=" \
+ "if ${load} mmc ${mmcdev}:${mmcpart} ${loadaddr} boot.ini;then " \
+ "ini '' ${loadaddr} ${filesize};" \
+ "ini ${section} ${loadaddr} ${filesize};" \
+ "fi\0" \
+ "mmcboot=" \
+ "setenv bootargs ${options};" \
+ "if ${load} mmc ${mmcdev}:${mmcpart} ${loadaddr} ${linux};then " \
+ "if test -n ${devicetree};then " \
+ "if ${load} mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${devicetree};then " \
+ "if test -n ${initrd};then " \
+ "if ${load} mmc ${mmcdev}:${mmcpart} ${initrd_addr} ${initrd};then " \
+ "bootz ${loadaddr} ${initrd_addr} ${fdt_addr};" \
+ "fi;" \
+ "else " \
+ "bootz ${loadaddr} - ${fdt_addr};" \
+ "fi;" \
+ "fi;" \
+ "else " \
+ "if test -n ${initrd};then " \
+ "if ${load} mmc ${mmcdev}:${mmcpart} ${initrd_addr} ${initrd};then " \
+ "bootz ${loadaddr} ${initrd_addr};" \
+ "fi;" \
+ "else " \
+ "bootz ${loadaddr};" \
+ "fi;" \
+ "fi;" \
+ "fi\0" \
+ "error=" \
+ "while true;do " \
+ "gpio s ${batteryled};sleep 1;" \
+ "gpio c ${batteryled};sleep 1;" \
+ "done"
+
+#define CONFIG_BOOTCOMMAND \
+ "if gpio i ${powerkey};then " \
+ "gpio s ${batteryled};" \
+ "setenv section fallback;" \
+ "fi;" \
+ "setenv bootcmd run mmcboot;" \
+ "run mmcinit;" \
+ "run bootcmd;" \
+ "run error"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0x90000000
+#define CONFIG_SYS_MEMTEST_END 0x90010000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_DDR_CLKSEL 0
+#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
+#define CONFIG_SYS_MAIN_PWR_ON
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#endif
+
+#endif
--
2.1.3
More information about the U-Boot
mailing list