[U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips

Marek Vasut marex at denx.de
Sun Dec 7 06:26:55 CET 2014


On Sunday, December 07, 2014 at 02:50:25 AM, Scott Wood wrote:
> On Sun, 2014-12-07 at 02:32 +0100, Marek Vasut wrote:
> > On Sunday, December 07, 2014 at 12:45:30 AM, Scott Wood wrote:
> > > On Sat, 2014-12-06 at 14:07 +0100, Marek Vasut wrote:
> > > > On Tuesday, December 02, 2014 at 02:26:14 PM, Stefan Roese wrote:
> > > > > This patch adds support for multiple NAND chips connected to the
> > > > > i.MX6. Linux already supports this configuration. So lets port
> > > > > the missing features to the U-Boot driver to support more than
> > > > > one NAND chip here as well.
> > > > > 
> > > > > The necessary changes in detail are:
> > > > > 
> > > > > - Only use DMA channel 0 for all NAND chips:
> > > > >   Linux: a7c12d01 (mtd: gpmi: use DMA channel 0 for all the
> > > > >   
> > > > >                    nand chips)
> > > > >          
> > > > >          d159d8b7 (mtd: gpmi: decouple the chip select from
> > > > >          
> > > > >                    the DMA channel)
> > > > > 
> > > > > - On i.MX6 only use ready/busy pin for CS0:
> > > > >   Linux: 7caa4fd2 (mtd: gpmi: imx6: fix the wrong method for
> > > > >   
> > > > >                    checking ready/busy)
> > > > > 
> > > > > To enable this feature the board needs to configure
> > > > > CONFIG_SYS_NAND_MAX_CHIPS to 2 (or more).
> > > > > 
> > > > > With these changes I'm able to detect and acces 2 NAND chips:
> > > > > 
> > > > > => nand device
> > > > > 
> > > > > Device 0: 2x nand0, sector size 128 KiB
> > > > > 
> > > > >   Page size      2048 b
> > > > >   OOB size         64 b
> > > > >   Erase size   131072 b
> > > > 
> > > > Shouldn't you see "Device 0" and "Device 1" ?
> > > 
> > > The "2x" indicates that there are two identical chips being treated as
> > > a single device (chip->numchips).
> > 
> > Is that correct ? What if I have two different NAND chips on this
> > controller?
> 
> Then they need to be represented as separate NAND devices, rather than
> multiple chips on one device.

Gee, I wouldn't have though of that, really ;-)

So is this patch correct or not ?

Best regards,
Marek Vasut


More information about the U-Boot mailing list