[U-Boot] [PATCH v1] arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support

[Alison Wang]

The SD/NAND/QSPI boot definations are wrong for QE support, this
patch is to fix this error.

Signed-off-by: Alison Wang <alison.wang at freescale.com>
---
 include/configs/ls1021aqds.h | 3 ++-
 include/configs/ls1021atwr.h | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index f906215..6a6f620 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -104,7 +104,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_FSL_CAAM			/* Enable CAAM */
 
-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
 #endif
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index db93201..9a497a6 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -110,7 +110,8 @@
 
 #define CONFIG_FSL_CAAM			/* Enable CAAM */
 
-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
 #endif
 
-- 
2.1.0.27.g96db324