[U-Boot] [PATCH v3] bcm281xx: add support for "USB OTG clock"

Steve Rae srae at broadcom.com
Tue Dec 9 20:40:11 CET 2014


enable this clock with the following:
  clk_usb_otg_enable((void *)HSOTG_BASE_ADDR)

Signed-off-by: Steve Rae <srae at broadcom.com>
---

Changes in v3:
clean up return statement as per Michael Trimarchi <michael at amarulasolutions.com>

Changes in v2:
removed unrelated changes as per Felipe Balbi <balbi at ti.com>

 arch/arm/cpu/armv7/bcm281xx/Makefile        |  1 +
 arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c  | 16 ++++++++++++++++
 arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c   | 27 +++++++++++++++++++++++++++
 arch/arm/cpu/armv7/kona-common/clk-stubs.c  |  5 +++++
 arch/arm/include/asm/arch-bcm281xx/sysmap.h |  2 ++
 arch/arm/include/asm/kona-common/clk.h      |  1 +
 6 files changed, 52 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c

diff --git a/arch/arm/cpu/armv7/bcm281xx/Makefile b/arch/arm/cpu/armv7/bcm281xx/Makefile
index bd867a2..f24aeb3 100644
--- a/arch/arm/cpu/armv7/bcm281xx/Makefile
+++ b/arch/arm/cpu/armv7/bcm281xx/Makefile
@@ -10,3 +10,4 @@ obj-y	+= clk-bcm281xx.o
 obj-y	+= clk-sdio.o
 obj-y	+= clk-bsc.o
 obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
+obj-y	+= clk-usb-otg.o
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
index d16b99f..7e25255 100644
--- a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
@@ -209,6 +209,10 @@ static struct peri_clk_data sdio4_sleep_data = {
 	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
 };
 
+static struct bus_clk_data usb_otg_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
+};
+
 static struct bus_clk_data sdio1_ahb_data = {
 	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
 };
@@ -331,6 +335,17 @@ static struct ccu_clock esub_ccu_clk = {
  */
 
 /* KPM bus clocks */
+static struct bus_clock usb_otg_ahb_clk = {
+	.clk = {
+		.name = "usb_otg_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &usb_otg_ahb_data,
+};
+
 static struct bus_clock sdio1_ahb_clk = {
 	.clk = {
 		.name = "sdio1_ahb_clk",
@@ -541,6 +556,7 @@ struct clk_lookup arch_clk_tbl[] = {
 	CLK_LK(bsc2),
 	CLK_LK(bsc3),
 	/* Bus clocks */
+	CLK_LK(usb_otg_ahb),
 	CLK_LK(sdio1_ahb),
 	CLK_LK(sdio2_ahb),
 	CLK_LK(sdio3_ahb),
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c b/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
new file mode 100644
index 0000000..1d7c5af
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for the USB OTG port */
+int clk_usb_otg_enable(void *base)
+{
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case HSOTG_BASE_ADDR:
+		ahbstr = "usb_otg_ahb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	return clk_get_and_enable(ahbstr);
+}
diff --git a/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
index 338e0e4..fa10802 100644
--- a/arch/arm/cpu/armv7/kona-common/clk-stubs.c
+++ b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
@@ -19,3 +19,8 @@ int __weak clk_bsc_enable(void *base, u32 rate, u32 *actual_ratep)
 {
 	return 0;
 }
+
+int __weak clk_usb_otg_enable(void *base)
+{
+	return 0;
+}
diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
index 350e7f6..93ebf34 100644
--- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h
+++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
@@ -13,6 +13,8 @@
 #define ESUB_CLK_BASE_ADDR	0x38000000
 #define ESW_CONTRL_BASE_ADDR	0x38200000
 #define GPIO2_BASE_ADDR		0x35003000
+#define HSOTG_BASE_ADDR		0x3f120000
+#define HSOTG_CTRL_BASE_ADDR	0x3f130000
 #define KONA_MST_CLK_BASE_ADDR	0x3f001000
 #define KONA_SLV_CLK_BASE_ADDR	0x3e011000
 #define PMU_BSC_BASE_ADDR	0x3500d000
diff --git a/arch/arm/include/asm/kona-common/clk.h b/arch/arm/include/asm/kona-common/clk.h
index 2c7e829..a5e2fd9 100644
--- a/arch/arm/include/asm/kona-common/clk.h
+++ b/arch/arm/include/asm/kona-common/clk.h
@@ -25,5 +25,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
 struct clk *clk_get_parent(struct clk *clk);
 int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
 int clk_bsc_enable(void *base);
+int clk_usb_otg_enable(void *base);
 
 #endif
-- 
1.8.5



More information about the U-Boot mailing list