[U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board

[Huan Wang]

York,

> > On 12/09/2014 01:38 AM, Alison Wang wrote:
> > > This patch adds QSPI boot support for LS1021AQDS/TWR board.
> > > The QSPI boot image need to be programmed into the QSPI flash first.
> > > Then the booting will start from QSPI memory space.
> > >
> > > Signed-off-by: Alison Wang <alison.wang at freescale.com>
> > > ---
> > > Change log:
> > >  v2: Rebase the patch.
> > >
> >
> > <snip>
> >
> > > diff --git a/include/configs/ls1021aqds.h
> > > b/include/configs/ls1021aqds.h index 6a6f620..653dbef 100644
> > > --- a/include/configs/ls1021aqds.h
> > > +++ b/include/configs/ls1021aqds.h
> >
> > <snip>
> >
> > > @@ -315,7 +334,11 @@
> > >  #define CONFIG_CMDLINE_TAG
> > >  #define CONFIG_CMDLINE_EDITING
> > >
> > > +#ifdef CONFIG_QSPI_BOOT
> > > +#undef CONFIG_CMD_IMLS
> > > +#else
> > >  #define CONFIG_CMD_IMLS
> > > +#endif
> > >
> > Is it necessary to undef?
> >
> [Alison Wang] It is necessary, because this file includes
> "include/config_cmd_default.h". In include/config_cmd_default.h,
> CONFIG_CMD_IMLS is defined.
> 
> Thanks.
[Alison Wang] I may misunderstand your meaning. For QSPI boot, IFC is disabled because IFC and QSPI are pin multiplexed, so CONFIG_CMD_IMLS should not be defined too.


Best Regards,
Alison Wang