[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic]

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 2a82ec77d27ef5f860a107c4b764643a655dceeb:

  Prepare v2015.01-rc2 (2014-11-24 17:08:47 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 9e89a64fbd0ddfde17741b38cc95fbdc02679d86:

  arm: vf610: improve evaluation of reset source (2014-12-01 10:20:22 +0100)

----------------------------------------------------------------
Fabio Estevam (5):
      thermal: imx_thermal: Do not display calibration data
      mx6sxsabresd: Add thermal support
      mxc_ocotp: Do not disable the OCOTP clock after every access
      config_fallbacks: Add a default entry for CONFIG_SYS_PBSIZE
      mx6sabre_common: Use the default CONFIG_SYS_PBSIZE

Guillaume GARDET (1):
      imx: mx53loco: Add raw initrd support

Hector Palacios (3):
      mxs_ocotp: prevent error path from returning success
      mxs_ocotp: check for errors from the OTP controller after writing
      mxs_ocotp: clear the error flag before initiating write operation

Soeren Moch (3):
      tbs2910: fix Kconfig
      sata: fix reset_sata for dwc_ahsata
      tbs2910: fix lost characters on serial input

Stefan Agner (1):
      arm: vf610: improve evaluation of reset source

Stefan Roese (1):
      arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)

 arch/arm/Kconfig                            |  1 +
 arch/arm/cpu/armv7/mx6/clock.c              |  2 +-
 arch/arm/cpu/armv7/vf610/generic.c          | 21 +++++++++++----------
 arch/arm/imx-common/cpu.c                   |  3 +++
 arch/arm/include/asm/arch-mx6/clock.h       |  8 ++++----
 arch/arm/include/asm/arch-vf610/imx-regs.h  |  8 ++++++++
 board/aristainetos/aristainetos.c           |  2 +-
 board/freescale/mx6slevk/mx6slevk.c         |  2 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  2 +-
 board/solidrun/hummingboard/hummingboard.c  |  2 +-
 board/tbs/tbs2910/Kconfig                   |  8 --------
 drivers/block/dwc_ahsata.c                  | 14 ++++++++------
 drivers/misc/mxc_ocotp.c                    |  2 --
 drivers/misc/mxs_ocotp.c                    | 14 ++++++++++----
 drivers/thermal/imx_thermal.c               |  2 --
 include/config_fallbacks.h                  |  4 ++++
 include/configs/mx53loco.h                  |  1 +
 include/configs/mx6sabre_common.h           |  3 ---
 include/configs/mx6sxsabresd.h              | 10 ++++++++++
 include/configs/tbs2910.h                   |  2 +-
 20 files changed, 66 insertions(+), 45 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================