[U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size

[Bin Meng]

This series update SPI flash supported read commands per datasheet
in the flash params table, and change flash sector size to 4KiB as
long as flash supports sector erase (20h) command, to ensure
'sf erase offset +len' work on 4KiB boundary instead of 64KiB when
given SECT_4K.

Changes in v3:
- Rebase with Jagan's patch series @ http://patchwork.ozlabs.org/patch/419154/


Bin Meng (9):
  sf: Update SST flash params
  sf: Update Atmel flash params
  sf: Update EON flash params
  sf: Update GigaDevice flash params
  sf: Update Macronix flash params
  sf: Update Spansion flash params
  sf: Update Micron flash params
  sf: Update Winbond flash params
  sf: Give proper spacing between flash table params

 drivers/mtd/spi/sf_internal.h |   5 ++
 drivers/mtd/spi/sf_params.c   | 185 ++++++++++++++++++++++--------------------
 drivers/mtd/spi/sf_probe.c    |   4 +
 3 files changed, 104 insertions(+), 90 deletions(-)

-- 
1.8.2.1