[U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board

[Kevin Hilman]

Hyungwon Hwang <human.hwang at samsung.com> writes:

> Dear Kevin,
>
> On Tue, 09 Dec 2014 15:36:00 -0800
> Kevin Hilman <khilman at kernel.org> wrote:
>
>> Hyungwon Hwang <human.hwang at samsung.com> writes:
>> 
>> > This is v11 of the patchset adding support Odroud XU3 board.
>> 
>> I finally got around to testing this on top of v2015.01-rc3 on my XU3.
>> 
>> As I mentioned earlier, I had to enable the USB and networking options
>> so I could dhcp/tftp but after that it works for me.
>> 
>> Feel free to add:
>> 
>> Tested-by: Kevin Hilman <khilman at linaro.org>
>
> Thanks for yout review. Sjoerd is waiting for his patch merged
> (title: Exynos: Move down common USB
> configuration). So the features related USB and networking will be
> enabled after this patchset and his patch are merged.

OK, good.

>> 
>> [...]
>> 
>> > Note: If you use micro SD card for your test you have to apply the
>> > below patch additionally. This patch is needed, because micro sd
>> > card is recognized as MMC1 instead of MMC0. Additional work is
>> > needed to make it work regardless of device id.
>> 
>> FYI, with or without your MMC ID patch, I wasn't able to save the
>> environment to the SD card I'm booting from:
>> 
>> ODROID-XU3 # saveenv
>> Saving Environment to MMC...
>> dwmci_send_cmd: Timeout.
>> MMC init failed
>> 
>
> Actually I just tested it again. But it works for me.
>
> Saving Environment to MMC...
> Writing to MMC(1)... done
>
> I applied my patchset and MMC ID patch to commit
> 38cd8c4253013ccdd4052ee021f6066fe9a52551 in
> http://git.denx.de/u-boot-samsung.git (branch: master).
>
> I don't know why it does't work for you. Please feel free to need my
> help for this, if you need.

Curious wh you're using u-boot-samsung.git and not mainline.  Can you
test this using mainline u-boot v2015.01-rc3?

Kevin