[U-Boot] [PATCH v4 8/9] arm: ls102xa: Add SD boot support for LS1021ATWR board

York Sun yorksun at freescale.com
Thu Dec 11 20:04:10 CET 2014


On 12/02/2014 11:00 PM, Alison Wang wrote:
> This patch adds SD boot support for LS1021ATWR board. SPL
> framework is used. PBL initialize the internal RAM and copy
> SPL to it, then SPL initialize DDR using SPD and copy u-boot
> from SD card to DDR, finally SPL transfer control to u-boot.
> 
> Signed-off-by: Chen Lu <chen.lu at freescale.com>
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> Signed-off-by: Jason Jin <jason.jin at freescale.com>
> ---
> Change log:
>  v4: Enable IFC in SD boot.
>  v3: Update MAINTAINERS file.
>      Update PBI and RCW for SD boot.
>  v2: Use generic u-boot-spl.lds.
> 

Applied to u-boot-fsl-qoriq master, awaiting upstream.

York





More information about the U-Boot mailing list