[U-Boot] [RESEND][PATCH v11 2/3] Odroid-XU3: Add support for Odroid-XU3

Hyungwon Hwang human.hwang at samsung.com
Fri Dec 12 06:45:45 CET 2014


This patch adds support for Odroid-XU3.

Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
Reviewed-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Acked-by: Simon Glass <sjg at chromium.org>
Tested-by: Kevin Hilman <khilman at linaro.org>
Cc: Minkyu Kang <mk7.kang at samsung.com>
Cc: Lukasz Majewski <l.majewski at samsung.com>
Cc: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Cc: Javier Martinez Canillas <javier at dowhile0.org>
Cc: Simon Glass <sjg at chromium.org>
---
Changes for v3:
- Remove unnecessary node from DT file
- Remove unnecessary features from config file
- Remove unnecessary macros from board-specific header file
- Fix some trivial typos in comments

Changes for v4:
- Add MMC FIFO buffer's configuration to DT file
- Make CONFIG_OF_CONTROL be set by the target information
- Add basic document to doc/README.odroid-xu3
- Add CONFIG_CMD_EXT4 to config file
- Add environment size and offset to config file
- Add extra default environment to make bootable without modification
- Remove unnecessary features from config file

Changes for v5:
- Convert /include/ to #include in DT file

Changes for v6:
- Separate out the documentation to new commit
- Remove unnecessary header file inclusions from the board-specific setup file
- Make the function board_clock_init be declared, only when
  CONFIG_BOARD_EARLY_INIT_F is defined

Changes for v7:
- Remove OF_CONTROL dependency from !SPL_BUILD

Changes for v8:
- Remove unnecessary properties in DT mmc node

Changes for v9:
- Remove useless variables in the default environment
- Replace the detailed information to the reference to the documentation

Changes for v10:
- Remove the config unsets which are added to make the result image small
  This is needless now, because the image is not small enough even though these
  unsets are added.
- Remove redundant DT node and properties
- Remove the odroid-xu3 board file and make odroid-xu3 a variant of smdk5420

Changes for v11:
- Remove duplicated CONFIG_CMD_EXT2/EXT4/FAT from odroid_xu3.h
- Fix the typo in the comment, which is found in odroid_xu3.h

 arch/arm/cpu/armv7/exynos/Kconfig     |  4 +++
 arch/arm/dts/Makefile                 |  3 ++-
 arch/arm/dts/exynos5422-odroidxu3.dts | 45 +++++++++++++++++++++++++++++++
 board/samsung/smdk5420/Kconfig        | 13 +++++++++
 configs/odroid-xu3_defconfig          |  4 +++
 include/configs/odroid_xu3.h          | 51 +++++++++++++++++++++++++++++++++++
 6 files changed, 119 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts
 create mode 100644 configs/odroid-xu3_defconfig
 create mode 100644 include/configs/odroid_xu3.h

diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index f3eadb4..7fcb5d2 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -24,6 +24,10 @@ config TARGET_TRATS2
 config TARGET_ODROID
 	bool "Exynos4412 Odroid board"
 
+config TARGET_ODROID_XU3
+	bool "Exynos5422 Odroid board"
+	select OF_CONTROL
+
 config TARGET_ARNDALE
 	bool "Exynos5250 Arndale board"
 	select CPU_V7_HAS_NONSEC
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e5846ea..a811b1b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -13,7 +13,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5420-peach-pit.dtb \
-	exynos5800-peach-pi.dtb
+	exynos5800-peach-pi.dtb \
+	exynos5422-odroidxu3.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
new file mode 100644
index 0000000..cff32a9
--- /dev/null
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -0,0 +1,45 @@
+/*
+ * Odroid XU3 device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+
+/ {
+	model = "Odroid XU3 based on EXYNOS5422";
+	compatible = "samsung,odroidxu3", "samsung,exynos5";
+
+	aliases {
+		serial0 = "/serial at 12C00000";
+		console = "/serial at 12C20000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000
+			0x80000000 0x10000000
+			0x90000000 0x10000000
+			0xa0000000 0x10000000
+			0xb0000000 0xea00000>;
+	};
+
+	serial at 12C20000 {
+		status="okay";
+	};
+
+	mmc at 12200000 {
+		fifoth_val = <0x201f0020>;
+	};
+
+	mmc at 12220000 {
+		fifoth_val = <0x201f0020>;
+	};
+};
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index e7aafe5..ff28b1d 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -1,3 +1,16 @@
+if TARGET_ODROID_XU3
+
+config SYS_BOARD
+	default "smdk5420"
+
+config SYS_VENDOR
+	default "samsung"
+
+config SYS_CONFIG_NAME
+	default "odroid_xu3"
+
+endif
+
 if TARGET_PEACH_PI
 
 config SYS_BOARD
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
new file mode 100644
index 0000000..74aa0cf
--- /dev/null
+++ b/configs/odroid-xu3_defconfig
@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_TARGET_ODROID_XU3=y
+CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
new file mode 100644
index 0000000..a92b5cc
--- /dev/null
+++ b/include/configs/odroid_xu3.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ * Hyungwon Hwang <human.hwang at samsung.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_ODROID_XU3_H
+#define __CONFIG_ODROID_XU3_H
+
+#include "exynos5420-common.h"
+
+#define CONFIG_SYS_PROMPT		"ODROID-XU3 # "
+#define CONFIG_IDENT_STRING		" for ODROID-XU3"
+
+#define CONFIG_BOARD_COMMON
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x43E00000
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2			/* use SERIAL 2 */
+
+#define TZPC_BASE_OFFSET		0x10000
+
+#define CONFIG_CMD_MMC
+
+/*
+ * FIXME: The number of bank is actually 8. But there is no way to reserve the
+ * last 16 Mib in the last bank now. So I just excluded the last bank
+ * temporally.
+ */
+#define CONFIG_NR_DRAM_BANKS	7
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#undef CONFIG_ENV_SIZE
+#undef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
+
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC2,115200n8\0"
+
+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
+#undef CONFIG_EXYNOS_TMU
+#undef CONFIG_TMU_CMD_DTT
+
+#endif	/* __CONFIG_H */
-- 
1.9.1



More information about the U-Boot mailing list