Intel Tunnel Creek GPIO register block is compatible with current
ich6-gpio driver, except the offset and content of GPIO block base
address register in the LPC PCI configuration space are different.
Use u16 instead of u32 to store the 16-bit I/O address of the GPIO
registers so that it could support both Ivybridge and Tunnel Creek.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2:
- Add a comment to explain we don't need check bit0 in GPIO base
address register
- Add setup_pch_gpios() in crownbay.c
arch/x86/include/asm/arch-queensbay/gpio.h | 13 +++++++++++++
arch/x86/include/asm/gpio.h | 4 ++--
board/coreboot/coreboot/coreboot.c | 2 +-
board/google/chromebook_link/link.c | 2 +-
board/intel/crownbay/crownbay.c | 5 +++++
drivers/gpio/intel_ich6_gpio.c | 20 ++++++++++++--------
6 files changed, 34 insertions(+), 12 deletions(-)
create mode 100644 arch/x86/include/asm/arch-queensbay/gpio.h
diff --git a/arch/x86/include/asm/arch-queensbay/gpio.h b/arch/x86/include/asm/arch-queensbay/gpio.h
new file mode 100644
index 0000000..ab4e059
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/gpio.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_GPIO_H_
+#define _X86_ARCH_GPIO_H_
+
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x44
+
+#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
index 1787e52..1099427 100644
--- a/arch/x86/include/asm/gpio.h
+++ b/arch/x86/include/asm/gpio.h
@@ -11,7 +11,7 @@
#include <asm-generic/gpio.h>
struct ich6_bank_platdata {
- uint32_t base_addr;
+ uint16_t base_addr;
const char *bank_name;
};
@@ -147,7 +147,7 @@ struct pch_gpio_map {
} set3;
};
-void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio);
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
#endif /* _X86_GPIO_H_ */
diff --git a/board/coreboot/coreboot/coreboot.c b/board/coreboot/coreboot/coreboot.c
index b260f9a..154faf6 100644
--- a/board/coreboot/coreboot/coreboot.c
+++ b/board/coreboot/coreboot/coreboot.c
@@ -16,7 +16,7 @@ int arch_early_init_r(void)
return 0;
}
-void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio)
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
{
return;
}
diff --git a/board/google/chromebook_link/link.c b/board/google/chromebook_link/link.c
index 4d95c1c..9978e92 100644
--- a/board/google/chromebook_link/link.c
+++ b/board/google/chromebook_link/link.c
@@ -125,7 +125,7 @@ int board_early_init_f(void)
return 0;
}
-void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio)
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
{
/* GPIO Set 1 */
if (gpio->set1.level)
diff --git a/board/intel/crownbay/crownbay.c b/board/intel/crownbay/crownbay.c
index 8c6df98..54670d3 100644
--- a/board/intel/crownbay/crownbay.c
+++ b/board/intel/crownbay/crownbay.c
@@ -19,3 +19,8 @@ int board_early_init_f(void)
return 0;
}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+ return;
+}
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index 1f0d9df..5f67b3f 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -39,9 +39,9 @@
struct ich6_bank_priv {
/* These are I/O addresses */
- uint32_t use_sel;
- uint32_t io_sel;
- uint32_t lvl;
+ uint16_t use_sel;
+ uint16_t io_sel;
+ uint16_t lvl;
};
/* TODO: Move this to device tree, or platform data */
@@ -57,7 +57,7 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
u8 tmpbyte;
u16 tmpword;
u32 tmplong;
- u32 gpiobase;
+ u16 gpiobase;
int offset;
/* Where should it be? */
@@ -116,11 +116,15 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
/*
* GPIOBASE moved to its current offset with ICH6, but prior to
* that it was unused (or undocumented). Check that it looks
- * okay: not all ones or zeros, and mapped to I/O space (bit 0).
+ * okay: not all ones or zeros.
+ *
+ * Note we don't need check bit0 here, because the Tunnel Creek
+ * GPIO base address register bit0 is reserved (read returns 0),
+ * while on the Ivybridge the bit0 is used to indicate it is an
+ * I/O space.
*/
tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
- if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
- !(tmplong & 0x00000001)) {
+ if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
debug("%s: unexpected GPIOBASE value\n", __func__);
return -ENODEV;
}
@@ -131,7 +135,7 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
* at the offset that we just read. Bit 0 indicates that it's
* an I/O address, not a memory address, so mask that off.
*/
- gpiobase = tmplong & 0xfffffffe;
+ gpiobase = tmplong & 0xfffe;
offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
if (offset == -1) {
debug("%s: Invalid register offset %d\n", __func__, offset);
--
1.8.2.1