[U-Boot] [PATCH] mtd: nand: revive "nand scrub" command

[Masahiro Yamada]

Hi Scott,


On Tue, 16 Dec 2014 00:24:06 -0600
Scott Wood <scottwood at freescale.com> wrote:

> On Tue, 2014-12-16 at 07:21 +0100, Heiko Schocher wrote:
> > Hello Tom, Scott,
> > 
> > Am 16.12.2014 02:26, schrieb Tom Rini:
> > > As we're neck deep in "See? Scott was right" I'm inclined to go with
> > > what Scott is saying.  We tried it, it actively didn't work, lets step
> > > back, evaluate and move along.
> > 
> > Ok, I have no objections against that, it was just my point of view ...
> > 
> > And yes, I missed here and there some pieces when syncing with
> > linux 3.14 ... sorry for that, but I could not test every scenario for
> > every board ... and we had no clean base for using git, which at last
> > in my attempt ended in a big mess when syncing with linux ... so I started
> > more or less from scratch ...
> 
> I understand that for some of the mtd parts, but the nand code did have
> a relatively clean base.
> 
> > So ...
> > 
> > Who will send a "delete ifdef" patch?
> 
> I will.


Given that we have made a decision to turn around,
no point of adding the ifdefs by this patch.

V2 is now on our patchwork.
http://patchwork.ozlabs.org/patch/421803/




Best Regards
Masahiro Yamada