[U-Boot] [PATCH 8/8] arm: mx6: novena: Add proper LVDS display support

[Marek Vasut]

On Tuesday, December 16, 2014 at 05:22:31 PM, Simon Glass wrote:
> Hi Marek,
> 
> On 16 December 2014 at 06:09, Marek Vasut <marex at denx.de> wrote:
> > Repair the register configuration and add proper support for the
> > display attached to both LVDS channels.
> > 
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Igor Grinberg <grinberg at compulab.co.il>
> > Cc: Nikita Kiryanov <nikita at compulab.co.il>
> > Cc: Sean Cross <xobs at kosagi.com>
> > Cc: Simon Glass <sjg at chromium.org>
> > Cc: Stefano Babic <sbabic at denx.de>
> > Cc: Tim Harvey <tharvey at gateworks.com>
> > ---
> > 
> >  board/kosagi/novena/novena.c     |   8 +
> >  board/kosagi/novena/novena.h     |   8 +
> >  board/kosagi/novena/novena_spl.c |   7 +
> >  board/kosagi/novena/video.c      | 400
> >  ++++++++++++++++++++++++++++++++++++--- include/configs/novena.h       
> >   |   1 +
> >  5 files changed, 401 insertions(+), 23 deletions(-)
> 
> Could perhaps move the board to driver model for I2C.

That's the plan, not only this one, but SoCFPGA in general and all the DENX 
boards.

Best regards,
Marek Vasut