[U-Boot] [PATCH v4 10/15] x86: crownbay: Add SPI flash support
Bin Meng
bmeng.cn at gmail.com
Wed Dec 17 08:50:44 CET 2014
The Crown Bay board has an SST25VF016B flash connected to the Tunnel
Creek processor SPI controller used as the BIOS media where U-Boot
is stored. Enable this flash support.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v4: None
Changes in v3:
- Add a commit message for the SPI support
Changes in v2:
- Move PCH_LPC_DEV to arch/x86/include/asm/arch-queensbay/tnc.h
- Check return value of x86_cpu_init_f()
arch/x86/cpu/queensbay/tnc.c | 26 +++++++++++++++++++++++++-
arch/x86/include/asm/arch-queensbay/tnc.h | 15 +++++++++++++++
include/configs/crownbay.h | 2 ++
3 files changed, 42 insertions(+), 1 deletion(-)
create mode 100644 arch/x86/include/asm/arch-queensbay/tnc.h
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 8b9815f..8637cdc 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -6,18 +6,42 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/pci.h>
#include <asm/post.h>
+#include <asm/arch/tnc.h>
#include <asm/arch/fsp/fsp_support.h>
#include <asm/processor.h>
+static void unprotect_spi_flash(void)
+{
+ u32 bc;
+
+ bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
+ bc |= 0x1; /* unprotect the flash */
+ pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
+}
+
int arch_cpu_init(void)
{
+ struct pci_controller *hose;
+ int ret;
+
post_code(POST_CPU_INIT);
#ifdef CONFIG_SYS_X86_TSC_TIMER
timer_set_base(rdtsc());
#endif
- return x86_cpu_init_f();
+ ret = x86_cpu_init_f();
+ if (ret)
+ return ret;
+
+ ret = pci_early_init_hose(&hose);
+ if (ret)
+ return ret;
+
+ unprotect_spi_flash();
+
+ return 0;
}
int print_cpuinfo(void)
diff --git a/arch/x86/include/asm/arch-queensbay/tnc.h b/arch/x86/include/asm/arch-queensbay/tnc.h
new file mode 100644
index 0000000..67c5e05
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/tnc.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_TNC_H_
+#define _X86_ARCH_TNC_H_
+
+#include <pci.h>
+
+/* PCI Configuration Space (D31:F0): LPC */
+#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
+
+#endif /* _X86_ARCH_TNC_H_ */
diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
index 2314e62..a051b11 100644
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -45,6 +45,8 @@
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
+#define CONFIG_SPI_FLASH_SST
+
/* Video is not supported */
#undef CONFIG_VIDEO
#undef CONFIG_CFB_CONSOLE
--
1.8.2.1
More information about the U-Boot
mailing list