[U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support
Hans de Goede
hdegoede at redhat.com
Thu Dec 18 11:44:38 CET 2014
Hi,
On 17-12-14 03:34, Chen-Yu Tsai wrote:
> On Wed, Dec 17, 2014 at 4:31 AM, Hans de Goede <hdegoede at redhat.com> wrote:
>> The axp223 appears to be the same as the axp221, except that it uses the
>> rsb to communicate rather then the p2wi. At least all the registers we use
>> are 100% the same.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> arch/arm/cpu/armv7/sunxi/cpu_info.c | 2 +-
>> drivers/power/Kconfig | 8 ++--
>> drivers/power/axp221.c | 88 ++++++++++++++++++++++++++++---------
>> include/axp221.h | 4 ++
>> 4 files changed, 76 insertions(+), 26 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
>> index 7a3a4ca..b6cb9de 100644
>> --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
>> +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
>> @@ -76,7 +76,7 @@ int print_cpuinfo(void)
>>
>> int sunxi_get_sid(unsigned int *sid)
>> {
>> -#ifdef CONFIG_MACH_SUN6I
>> +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
>> #ifdef CONFIG_AXP221_POWER
>> return axp221_get_sid(sid);
>> #else
>> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
>> index 1ec7c0e..7373a79 100644
>> --- a/drivers/power/Kconfig
>> +++ b/drivers/power/Kconfig
>> @@ -1,10 +1,10 @@
>> config AXP221_POWER
>> - boolean "axp221 pmic support"
>> - depends on MACH_SUN6I
>> + boolean "axp221 / axp223 pmic support"
>> + depends on MACH_SUN6I || MACH_SUN8I
>> default y
>> ---help---
>> - Say y here to enable support for the axp221 pmic found on most sun6i
>> - (A31) boards.
>> + Say y here to enable support for the axp221 / axp223 pmic found on most
>> + sun6i (A31) / sun8i (A23) boards.
>>
>> config AXP221_DLDO1_VOLT
>> int "axp221 dldo1 voltage"
>> diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
>> index 826567a..717adad 100644
>> --- a/drivers/power/axp221.c
>> +++ b/drivers/power/axp221.c
>> @@ -1,4 +1,10 @@
>> /*
>> + * AXP221 and AXP223 driver
>> + *
>> + * IMPORTANT when making changes to this file check that the registers
>> + * used are the same for the axp221 and axp223.
>> + *
>> + * (C) Copyright 2014 Hans de Goede <hdegoede at redhat.com>
>> * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
>> *
>> * SPDX-License-Identifier: GPL-2.0+
>> @@ -7,8 +13,50 @@
>> #include <common.h>
>> #include <errno.h>
>> #include <asm/arch/p2wi.h>
>> +#include <asm/arch/rsb.h>
>> #include <axp221.h>
>>
>> +/*
>> + * The axp221 uses the p2wi bus, the axp223 is identical (for all registers
>> + * used sofar) but uses the rsb bus. These functions abstract this.
>> + */
>> +static int pmic_bus_init(void)
>> +{
>> +#ifdef CONFIG_MACH_SUN6I
>> + p2wi_init();
>> + return p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
>> + AXP221_INIT_DATA);
>> +#else
>> + int ret;
>> +
>> + rsb_init();
>> +
>> + ret = rsb_set_device_mode(AXP223_DEVICE_MODE_DATA);
>> + if (ret)
>> + return ret;
>> +
>> + return rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
>> +#endif
>> +}
>> +
>> +static int pmic_bus_read(const u8 addr, u8 *data)
>> +{
>> +#ifdef CONFIG_MACH_SUN6I
>> + return p2wi_read(addr, data);
>> +#else
>> + return rsb_read(AXP223_RUNTIME_ADDR, addr, data);
>> +#endif
>> +}
>> +
>> +static int pmic_bus_write(const u8 addr, u8 data)
>> +{
>> +#ifdef CONFIG_MACH_SUN6I
>> + return p2wi_write(addr, data);
>> +#else
>> + return rsb_write(AXP223_RUNTIME_ADDR, addr, data);
>> +#endif
>> +}
>> +
>> static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
>> {
>> if (mvolt < min)
>> @@ -24,12 +72,12 @@ static int axp221_setbits(u8 reg, u8 bits)
>> int ret;
>> u8 val;
>>
>> - ret = p2wi_read(reg, &val);
>> + ret = pmic_bus_read(reg, &val);
>> if (ret)
>> return ret;
>>
>> val |= bits;
>> - return p2wi_write(reg, val);
>> + return pmic_bus_write(reg, val);
>> }
>>
>> int axp221_set_dcdc1(unsigned int mvolt)
>> @@ -37,7 +85,7 @@ int axp221_set_dcdc1(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
>>
>> - ret = p2wi_write(AXP221_DCDC1_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -49,28 +97,28 @@ int axp221_set_dcdc2(unsigned int mvolt)
>> {
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
>>
>> - return p2wi_write(AXP221_DCDC2_CTRL, cfg);
>> + return pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
>> }
>>
>> int axp221_set_dcdc3(unsigned int mvolt)
>> {
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
>>
>> - return p2wi_write(AXP221_DCDC3_CTRL, cfg);
>> + return pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
>> }
>>
>> int axp221_set_dcdc4(unsigned int mvolt)
>> {
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
>>
>> - return p2wi_write(AXP221_DCDC4_CTRL, cfg);
>> + return pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
>> }
>>
>> int axp221_set_dcdc5(unsigned int mvolt)
>> {
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
>>
>> - return p2wi_write(AXP221_DCDC5_CTRL, cfg);
>> + return pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
>> }
>>
>> int axp221_set_dldo1(unsigned int mvolt)
>> @@ -78,7 +126,7 @@ int axp221_set_dldo1(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_DLDO1_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_DLDO1_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -91,7 +139,7 @@ int axp221_set_dldo2(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_DLDO2_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_DLDO2_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -104,7 +152,7 @@ int axp221_set_dldo3(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_DLDO3_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_DLDO3_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -117,7 +165,7 @@ int axp221_set_dldo4(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_DLDO4_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_DLDO4_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -130,7 +178,7 @@ int axp221_set_aldo1(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_ALDO1_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -143,7 +191,7 @@ int axp221_set_aldo2(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_ALDO2_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -156,7 +204,7 @@ int axp221_set_aldo3(unsigned int mvolt)
>> int ret;
>> u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
>>
>> - ret = p2wi_write(AXP221_ALDO3_CTRL, cfg);
>> + ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
>> if (ret)
>> return ret;
>>
>> @@ -169,13 +217,11 @@ int axp221_init(void)
>> u8 axp_chip_id;
>> int ret;
>>
>> - p2wi_init();
>> - ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
>> - AXP221_INIT_DATA);
>> + ret = pmic_bus_init();
>> if (ret)
>> return ret;
>>
>> - ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
>> + ret = pmic_bus_read(AXP221_CHIP_ID, &axp_chip_id);
>> if (ret)
>> return ret;
>>
>> @@ -194,17 +240,17 @@ int axp221_get_sid(unsigned int *sid)
>> if (ret)
>> return ret;
>>
>> - ret = p2wi_write(AXP221_PAGE, 1);
>> + ret = pmic_bus_write(AXP221_PAGE, 1);
>> if (ret)
>> return ret;
>>
>> for (i = 0; i < 16; i++) {
>> - ret = p2wi_read(AXP221_SID + i, &dest[i]);
>> + ret = pmic_bus_read(AXP221_SID + i, &dest[i]);
>> if (ret)
>> return ret;
>> }
>>
>> - p2wi_write(AXP221_PAGE, 0);
>> + pmic_bus_write(AXP221_PAGE, 0);
>>
>> for (i = 0; i < 4; i++)
>> sid[i] = be32_to_cpu(sid[i]);
>> diff --git a/include/axp221.h b/include/axp221.h
>> index db219c6..10d35e1 100644
>> --- a/include/axp221.h
>> +++ b/include/axp221.h
>> @@ -10,6 +10,10 @@
>> #define AXP221_CTRL_ADDR 0x3e
>> #define AXP221_INIT_DATA 0x3e
>>
>> +#define AXP223_DEVICE_ADDR 0x3a3
>> +#define AXP223_RUNTIME_ADDR 0x2d
>> +#define AXP223_DEVICE_MODE_DATA 0x7c3e00
>> +
>> /* Page 0 addresses */
>> #define AXP221_CHIP_ID 0x03
>> #define AXP221_OUTPUT_CTRL1 0x10
>> --
>> 2.1.0
>>
>
> git am reports:
>
> Applying patch #422068 using 'git am'
> Description: [U-Boot,03/14] sunxi: axp221: Add axp223 support
> Applying: sunxi: axp221: Add axp223 support
> /home/wens/sunxi/u-boot/.git/rebase-apply/patch:50: trailing whitespace.
> *
> /home/wens/sunxi/u-boot/.git/rebase-apply/patch:76: trailing whitespace.
>
> warning: 2 lines add whitespace errors.
Fixed in my personal tree.
Regards,
Hans
More information about the U-Boot
mailing list