[U-Boot] [PATCH 1/2] SPI: Add S25FL064A and S25FL116K flash information

[Jagan Teki]

On 17 November 2014 at 20:21, Ben Dooks <ben.dooks at codethink.co.uk> wrote:
> From: Adnan Ali <adnan.ali at codethink.co.uk>
>
> Add S25FL064A and S25FL116K flash indentifiers.
>
> Signed-off-by: Adnan Ali <adnan.ali at codethink.co.uk>
> ---
>  drivers/mtd/spi/sf_params.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
> index 61545ca..462e5c2 100644
> --- a/drivers/mtd/spi/sf_params.c
> +++ b/drivers/mtd/spi/sf_params.c
> @@ -51,6 +51,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
>         {"S25FL016A",      0x010214, 0x0,       64 * 1024,    32,       0,                        0},
>         {"S25FL032A",      0x010215, 0x0,       64 * 1024,    64,       0,                        0},
>         {"S25FL064A",      0x010216, 0x0,       64 * 1024,   128,       0,                        0},
> +       {"S25FL064A",      0x010216, 0x0,       64 * 1024,   128,       0,                        0},

What is this, already there the same part - any new?

> +       {"S25FL116k",      0x014015, 0x0,       64 * 1024,   128,       0,                        0},

Is this tested! can you rebase master and send the same patches.

>         {"S25FL128P_256K", 0x012018, 0x0300,   256 * 1024,    64, RD_FULL,                   WR_QPP},
>         {"S25FL128P_64K",  0x012018, 0x0301,    64 * 1024,   256, RD_FULL,                   WR_QPP},
>         {"S25FL032P",      0x010215, 0x4d00,    64 * 1024,    64, RD_FULL,                   WR_QPP},
> --
> 2.1.1
>

thanks!
-- 
Jagan.