[U-Boot] [PATCH] arm: mx6: gw_ventana: Change clock init to enable NAND related clocks

[Stefano Babic]

On 04/12/2014 13:04, Stefan Roese wrote:
> Otherwise NAND booting is likely to fail. Since this disables the NAND related
> clocks and SPL can't load the main U-Boot from NAND.
> 
> This problem was introduced with this patch:
> 
> e25fbe3f (gw_ventana: Move the DCD settings to spl code)
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Tim Harvey <tharvey at gateworks.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================